HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of created pairsNum. of Pairs
[Remote Replication] Delete Cmd.Dev
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Delete Cmd.Dev,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Remote Replication] Delete Pairs
Example 1: when the copy type is Cnt Ac-S
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Delete Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
Type,Force,Result}
=[{1A-0x00-0,1B-0x00-0,P-VOL,No,Normal end},
{1A-0x00-1,1B-0x00-1,P-VOL,No,Normal end},
{1A-0x00-2,1B-0x00-2,P-VOL,No,Normal end},(Snip)-(Snip)],
Num. of Pairs=xx
Detailed Information 1
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-S: Continuous Access Synchronous
The port number, host group number, and LUN of the volume specified to the primary volumeP-VOL(Port-G-ID-LUN)
The port number, host group number, and LUN of the volume specified to the secondary
volume
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary siteType
P-VOL: Primary volume, S-VOL: Secondary volume
The setting for forced pair deletionForce
Yes: A pair is deleted even when the local storage system cannot communicate with the
remote storage system.
No: A pair is deleted only when the local storage system can change the pair to unpaired
volumes.
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of delete pairsNum. of Pairs
176 Audit log examples