HP XP7 Audit Log User and Reference Guide (H6F56-96001)

+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Result}
={99999,0x00,0x00,Default,6,Nomal end}
(Snip)
+{S/N,MCU LDKC,MCU,RCU LDKC,SSID,Result}
={99998,0x00,0x3F,0x00,0x0004,Nomal end}
+Num. of RCUs=xx
Detailed Information
DescriptionItem
The serial number of the deleted RCUS/N
The LDKC number of the connected LDKCMCU LDKC
The LDKC number of the paired LDKCRCU LDKC
The path group ID of the deleted RCU. When the path group ID is default setting, "Default"
is output.
Path Gr.ID
The controller ID of the deleted RCUController ID
7: XP7, 6: P9500, 5: XP24000/XP20000 Disk Array, 19: HUS VM
The CU number of the connected CUMCU
The SSID of the deleted RCUSSID
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of deleted RCUsNum. of RCUs
[Remote Replication] Edit Options
Example 1: Editing system option
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Edit Options,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S,{Max Initial Copy,CU Activity,
Path Blockade Watch(s),Path Blockade SIM Watch(s),
Service SIM,Switch}
={128,Enable,45,070,Not Report,-}
Example 2: Editing CU option
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Edit Options,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S,{LDKC,CU,Service SIM,PPRC Support,Max Initial Copy}
=[{0x00,0x00,Not Report,Yes,04},
{0x00,0x01,Not Report,Yes,04},
{0x00,0x02,Not Report,Yes,04},
{0x00,0x03,Not Report,Yes,04},
{0x00,0x04,Not Report,Yes,04},(Snip)-(Snip)],
Num. of CUs=255
Example 3: Editing both system option and CU option
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Edit Options,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S,{Max Initial Copy,CU Activity,
Remote Replication Descriptions 181