HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Basic Information
DescriptionParameter
The remote command device is assigned.Assign
The remote command device is released.Release
Detailed Information
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-J: Continuous Access Journal, Cnt Ac-J Z: Continuous Access Journal Z
The LDKC number to which the journal belongsLDKC
The journal numberJNL
The mirror IDMirrorID
The LDKC, CU, and LDEV numbers of the remote command device.R-Cmd.Dev.(LDKC:CU:LDEV)
The hyphen (-) indicates
• When assigning a remote command device without specifying a remote command device
as a parameter.
• When releasing a remote command device.
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of mirrors on which the setting is changedNum. of Mirrors
[Remote Replication] Resync Pairs
Example 1: when the copy type is Cnt Ac-S
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Resync Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
Fence Level,Copy Pace,Priority,Result}
=[{1A-0x00-0,1B-0x00-0,Never,15,256,Normal end},
{1A-0x00-1,1B-0x00-1,Never,15,256,Normal end},(Snip)-(Snip)],
Num. of Pairs=xx
Detailed Information 1
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-S: Continuous Access Synchronous
The port number, host group number, and LUN of the primary volumeP-VOL(Port-G-ID-LUN)
The port number, host group number, and LUN of the secondary volumeS-VOL(Port-G-ID-LUN)
The fence level setting (the condition that MCU rejects the write operation to the primary
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
190 Audit log examples