HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
The initial copy speed set (the number of tracks you can copy at a time)Copy Pace
The priority of resynchronizing operation set (scheduling order)Priority
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of resynchronized pairsNum. of Pairs
Example 2: when the copy type is Cnt Ac-S Z
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Resync Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S Z,{P-VOL(LDKC:CU:LDEV),S-VOL(LDEV),Fence Level,
Copy Pace,Priority,TS,Result}
=[{0x00:0x00:0x00,0xFE,Never,15,256,Enable,Normal end},
{0x00:0x00:0x01,0xFF,Never,15,256,Enable,Normal end},
(Snip)-(Snip)],Num. of Pairs=xx
Detailed Information 2
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-S Z: Continuous Access Synchronous Z
The LDKC, CU, and LDEV numbers of the primary volumeP-VOL(LDKC:CU:LDEV)
The LDEV number of the secondary volumeS-VOL(LDEV)
The fence level setting (the condition that MCU rejects the write operation to the primary
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time)Copy Pace
The priority of resynchronizing operation set (scheduling order)Priority
Indicates whether to transfer the host I/O time stamp to the secondary volume when
resynchronizing a pair
TS
Enable: Transfer, Disable: Not transfer
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of resynchronized pairsNum. of Pairs
Example 3: when the copy type is Cnt Ac-J
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Resync Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-J
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,
S/N,CTRLID,Priority,CTG,Range,M-JNL,R-JNL,Error Level,
Resync Mode,Result}
Remote Replication Descriptions 191