HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
The volume type of the volume on the primary siteType
P-VOL: Primary volume, S-VOL: Secondary volume
Indicates whether the writing to the secondary volume is enabledS-VOL Write
Enable: Writing is enabled, Disable: Writing is disabled
The suspend type settingKind
P-VOL Failure: Writing to the P-VOL is disabled
S-VOL: Writing to the P-VOL is enabled
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of split pairsNum. of Pairs
Example 2: when the copy type is Cnt Ac-S Z
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Split Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S Z,{VOL(LDKC:CU:LDEV),PairVOL(LDEV),
Type,SSB,Kind,Result}
=[{0x00:0x00:0x00,0xFE,P-VOL,Disable,S-VOL,Normal end},
{0x00:0x00:0x01,0xFF,P-VOL,Disable,S-VOL,Normal end},
(Snip)-(Snip)],Num. of Pairs=xx
Detailed Information 2
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-S Z: Continuous Access Synchronous Z
The LDKC, CU, and LDEV numbers of the volume on the primary siteVOL(LDKC:CU:LDEV)
The LDEV number of the paired volumePairVOL(LDEV)
The volume type of the connected volumeType
P-VOL: Primary volume, S-VOL: Secondary volume
The SSB[F/M=FB] option settingSSB
Enable: Notified, Disable: Not notified
The suspend type settingKind
P-VOL Failure: Writing to the P-VOL is disabled
S-VOL: Writing to the P-VOL is enabled
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of split pairsNum. of Pairs
194 Audit log examples