HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
Disable: Settings in the All Thresholds field are canceled.
A configured value in the All Thresholds field.Threshold
This information is output only when All Thresholds is configured.
The type of rate for All ThresholdsMode
IOPS: the I/O rate
KB/s: the transfer rate
This information is output only when All Thresholds is configured.
[Perf Ctl] Set All Prio WWN
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Ctl],Set All Prio WWN,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS}
Detailed Information
DescriptionItem
Settings in the All Thresholds field in the WWN tabAllPriority
Enable: All Thresholds is configured.
Disable: Settings in the All Thresholds field are canceled.
A configured value in the All Thresholds field.Threshold
This information is output only when All Thresholds is configured.
The type of rate for All ThresholdsMode
IOPS: the I/O rate
KB/s: the transfer rate
This information is output only when All Thresholds is configured.
[Perf Ctl] Set Ctrl Kind
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Ctl],Set Ctrl Kind,Kind=WWN,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information
DescriptionParameter
Indicates that you switched a definition of the server priority by a port without configuring
All Thresholds.
Kind=Port
Indicates that you switched a definition of the server priority by a port with configuring All
Thresholds.
Kind=All Port
Indicates that you switched a definition of the server priority by a WWN.Kind=WWN
This information is output whichever All Thresholds is configured or not.
Performance Control Descriptions 199