HP XP7 Audit Log User and Reference Guide (H6F56-96001)

6 Audit log examples of commands sent from hosts,
computers using RAID Manager, or hosts using Business
Continuity Manager
This topic provides examples and descriptions of the audit logs when a storage system receives
commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity
Manager. For detailed information on the version numbers in log output examples, see Table 4 (page
19)
Config Command (Open system)
The following shows examples and descriptions of the audit logs when a storage system receives
commands sent from hosts for open system or computers using RAID Manager.
Add Copy Group
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Copy Group
++Copy Group=AAAAAAA
++Device Group{BBBBBB},Num. of Device Groups=1
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The name of a copy group to be registeredCopy Group
The name of a device group to be registeredDevice Group
The number of device groups to be registeredNum. of DeviceGroups
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add Device Group
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Device Group
++Device Group=AAAAAAAA
++LDEV(LDKC:CU:LDEV)={0x00:0xAA:0xBB,0x00:0xCC:0xDD,……,
0x00:0xEE:0xFF},Num. of LDEVs=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
230 Audit log examples of commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity Manager