HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information
DescriptionItem
The command nameCommand
The name of a device group to be registeredDevice Group
When an LDEV is added, the name of the device group to which the LDEV is added
is output
The LDKC number, the CU number, and the LDEV number of an LDEV to be added to
the device group
LDEV(LDKC:CU:LDEV)
The number of LDEVs to be added to the device groupNum. of LDEVs
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add Device Group(Nick Name)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Device Group(Nick Name)
++Device Group=AAAAAAAA,Group Name=ABCDE
++LDEV(LDKC:CU:LDEV)={0x00:0xAA:0xBB,0x00:0xCC:0xDD,……,
0x00:0xEE:0xFF},Num. of LDEVs=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The name of a device group to be changedDevice Group
The name of the device group after the changeGroup Name
The LDKC number, the CU number, and the LDEV number of an LDEV to be added to
the device group
LDEV(LDKC:CU:LDEV)
The number of LDEVs to be added to the device groupNum. of LDEVs
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add TP Pool
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add TP Pool
++Pool ID=AA,Pool Name=AAAAAA
++LDEV(LDKC:CU:LDEV)={0x00:0xAA:0xBB,0x00:0xCC:0xDD,……,
0x00:0xEE:0xFF},Num. of LDEVs=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Config Command (Open system) 231