HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
The port name of the remote storage system to be addedRCU Port
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add Resource(Group)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Resource(Group)
++Resource Group=AAAAAAAA,Controller ID=7,S/N=23456
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The name of a resource group to be createdResource Group
The controller ID of the virtual storage machineController ID
No output when a virtual storage machine is not specified
The serial number of the virtual storage machineS/N
No output when a virtual storage machine is not specified
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add Resource/Delete Resource
Example: when the resource of the operation target is LDEV
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Resource/Delete Resource
++Resource Group ID=AAAAAAAA,LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The number of a resource group to be registered or deletedResource Group ID
The LDKC number, the CU number, and the LDEV number of an LDEV to be registered
or deleted
LDEV(LDKC:CU:LDEV)
This item is output when the resource of the operation target is LDEV
The number of a parity group to be registered or deletedPG
This item is output when the resource of the operation target is PG
Config Command (Open system) 237