HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
The name of a port to be registered or deletedPort
This item is output when the resource of the operation target is Port or Host Group
The number of a host group to be registered or deletedHost Group ID
This item is output when the resource of the operation target is Host Group
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add Snap Pool
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Snap Pool
++Pool ID=AA,Pool Name=XXXXX
++LDEV(LDKC:CU:LDEV)={0x00:0xAA:0xBB,0x00:0xCC:0xDD,……,
0x00:0xEE:0xFF},Num. of LDEVs=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The pool number of a pool for Fast Snap to be createdPool ID
The pool name of a pool for Fast Snap to be createdPool Name
No output if the pool name is not set
The LDKC number, the CU number, and the LDEV number of a pool volumeLDEV(LDKC:CU:LDEV)
The number of pool volumes to be createdNum. of LDEVs
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Add Snapshot
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Add Snapshot
++Snapshot Group=SSSSSSSS,Pool ID=A,
P-VOL(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL(LDKC:CU:LDEV)=0x00:0xCC:0xDD,
Virtual Storage Machine S/N=23456
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
238 Audit log examples of commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity Manager