HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Delete Pool(Ldev)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Delete Pool(Ldev)
++Pool ID=AA
++LDEV(LDLC:CU:LDEV)={0x00:0xAA:0xBB,0x00:0xCC:0xDD,……,
0x00:0xEE:0xFF},Num. of LDEVs=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The pool ID of a pool whose capacity is to be decreasedPool ID
The LDKC number, the CU number, and the LDEV number of an LDEV to be deleted
from the pool
LDEV(LDKC:CU:LDEV)
The number of LDEVs to be deleted from the poolNum. of LDEVs
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Delete RCU
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Delete RCU
+S/N=XXXXX,MCU=X,RCU=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The serial number of the remote storage systemS/N
The CU number of the local storage systemMCU
"Free" is output when CU Free is selected
The CU number of the remote storage systemRCU
"Free" is output when CU Free is selected
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Config Command (Open system) 247