HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
Through: Cache through mode
Write Sync: Write synchronous mode
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Modify External Group(Load Balance Mode)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify External Group(Load Balance Mode)
++PG=E1-1,Load Balance Mode=Extend
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The parity group number of the external volumePG
The load balance mode to be setLoad Balance Mode
Normal: Standard round robin
Extend: Extended round robin
Disable: Disabled
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Modify External Group(MP Blade)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify External Group(MP Blade)
+PG=E1-1,MP Blade ID=0
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The parity group number of the external volumePG
The MP blade ID to be allocated to a target volumeMP Blade ID
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Config Command (Open system) 257