HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Modify Ldev(Discard Zero Page)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify Ldev(Discard Zero Page)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The LDKC number, the CU number, and the LDEV number of an LDEV from which the
zero data page is discarded
LDEV(LDKC:CU:LDEV)
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Modify Ldev(MP Blade)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify Ldev(MP Blade)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,MP Blade ID=A
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The LDKC number, the CU number, and the LDEV number of an LDEV to which an MP
Blade is assigned
LDEV(LDKC:CU:LDEV)
The ID of the MP Blade to which the LDEV is assignedMP Blade ID
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Modify Ldev(Nick Name)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify Ldev(Nick Name)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,Nick Name=AAAAAAAAAA
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Config Command (Open system) 261