HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information
DescriptionItem
The command nameCommand
The pool number of a pool to be restoredPool ID
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Modify Pool(Threshold)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify Pool(Threshold)
++Pool ID=AA
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The pool number of a pool whose threshold is to be changedPool ID
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Modify Port
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Modify Port
++Port=1A,Speed(Gbps)=8,Fibre. Address=1,Fabric=Enable,
Connection=FC-AL,Switch=Enable,Virtual Storage Machine S/N=23456
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The name of a port whose setting is to be changedPort
When a virtual storage machine is specified, the port name of the virtual storage
machine is output.
The host speed of a portSpeed(Gbps)
The address of the Fibre Channel PortFibre. Address
Indicates whether the Fabric switch is enabled or disabledFabric
Enable or Disable will appear
264 Audit log examples of commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity Manager