HP XP7 Audit Log User and Reference Guide (H6F56-96001)

++Pool ID=AA,Pool Name=XXXXXXX
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The pool number of a pool to be renamedPool ID
The pool name after the changePool Name
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Reset Command Status
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Reset Command Status
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Reset Ldev Priority
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Reset Ldev Priority
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB
++WWN={AAAAAAAAA,BBBBBBBBB,……,DDDDDDDD},Num. of WWNs=X
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The LDKC number, the CU number, and the LDEV number of an LDEV from which the
priority information is deleted.
LDEV(LDKC:CU:LDEV)
The WWN to be deletedWWN
The number of WWNs to be deletedNum. of WWNs
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
274 Audit log examples of commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity Manager