HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Reset WWN
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Reset WWN
++Port=1A,Host Group ID=0xXX,WWN=XXXXXXXXXXXXXXXX,
Virtual Storage Machine S/N=23456
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The name of a port to which a WWN, on which the nickname is deleted, belongsPort
When a virtual storage machine is specified, the port name of the virtual storage
machine is output.
The ID of a host group to which a WWN, on which the nickname is deleted, belongsHost Group ID
The WWN on which the nickname is deletedWWN
The serial number of the virtual storage machineVirtual Storage Machine S/N
No output when a virtual storage machine is not specified
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Set Ldev Priority
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Set Ldev Priority
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB
++{WWN,Priority}=[{123456789ABCDEF0,Disable}],Num. of WWNs=1
+0000010200000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF,(snip)
Detailed Information
DescriptionItem
The command nameCommand
The LDKC number, the CU number, and the LDEV number of an LDEV to which the
definition of priority is set
LDEV(LDKC:CU:LDEV)
The WWN to be setWWN
Indicates the setting of the definition of priorityPriority
Enable: The priority is given, Disable: The priority is not given
The number of WWNs to be setNum. of WWNs
Indicates the 16 byte parameter added in the storage system and the command
parameter in binary format
Command parameter
Config Command (Open system) 275