HP XP7 Audit Log User and Reference Guide (H6F56-96001)

2. Enter the Port Number in the primary server setting.
3. Enter client certificate file name, password, and root certificate file name (only when you
choose New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol).
4. Perform the following if using a secondary syslog server.
1. Click Enable the Secondary Server.
2. Select IPv4 or IPv6 on Server setting and enter the IP address.
3. Enter the Port Number in the secondary server setting.
4. Enter client certificate file name, password, and root certificate file name (only when you
chose New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol).
5. Enter the name of the storage system from which you are transferring the audit log file in
Location Identification Name.
6. If selected New Syslog Protocol (TLS1.2/RFC5424) for Transfer Protocol, specify Timeout, Retry
Interval, and Number of Retries.
7. If you want to transfer the detailed information of audit log to the syslog server, click Enable
for Output Detailed Information.
8. Click Send Test Message to Syslog Server to test the settings.
9. Check that the test log (function name AuditLog, operation name Send Test Message) has
been sent to the syslog server.
10. Click Finish.
11. Confirm the settings from the setting confirmation window, and then enter the task name on
Task Name.
12. Click Apply. The task is registered. If you check the Go to tasks window for status check box,
the Task window is displayed.
13. Confirm that the syslog server is receiving the log of syslog server setting when the task has
completed. The function name of the log is "AuditLog" and the operation name is "Set Syslog
Server".
If the audit log is not received by the syslog server, check whether the set IP address and port
number matches the IP address and port number of the syslog server, and make sure that the Client
Certificate File Name, password, and the Root Certificate File Name are correct. If the settings are
correct, check the syslog server setting. See the user manual of the syslog server for the details of
the syslog server setting.
Related topics
• “Edit Audit Log Settings wizard” (page 314)
30 Using audit logs