HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Syslog tab
DescriptionItem
Selects a protocol to transfer the audit log.Transfer Protocol
• New Syslog Protocol (TLS1.2/RFC5424)
• Old Syslog Protocol (UDP/RFC3164)
Selects whether to use the syslog server.Primary Server
• Enable: Transfers the audit log to the syslog server.
• Disable: Do not transfer the audit log to the syslog server.
Enters an IP address of a server you want to set as a syslog server.Primary Server- Server
settings
• To set an IPv4 address, select IPv4 and enter four integers in the range of 0 to 255
(for example, nnn.nnn.nnn.nnn, where n is a number).
• To set an IPv6 address, select IPv6 and enter eight hexadecimal alphanumeric in the
range of 0 to FFFF. (for example,
hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh, where h is a hexadecimal
digit). An abbreviated style of IPv6 address can also be specified.
Enters a port number to be used at the syslog server.Primary Server- Port Number
Specifies a certificate file. Click Browse, and then specify a certificate file.Primary Server- Client
Certificate File Name
Edit Audit Log Settings wizard 315