HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at
Transfer Protocol.
Enters a password for the client certificate. Up to 128 characters can be entered for the
password.
Primary Server- Password
Allowed characters are alphanumeric characters and symbols: ! # $ % & ' ( ) * + , - . /
: ; < = > ? @ [ \ ] ^ _ ` { | } ~.
Inputs this item only when Client Certificate File Name is specified.
Specifies a certificate file. Click Browse, and then specify a certificate file.Primary Server- Root
Certificate File Name
Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at
Transfer Protocol.
Selects whether to use an alternative server (secondary server) to the syslog server.Secondary Server
• Enable: Transfers the audit log to the secondary server.
• Disable: Do not transfer the audit log to the secondary server.
Enters an IP address of a server you want to set as a secondary server. The restriction
for the available values is the same as that of Primary Server- Server Setting.
Secondary Server- Server
Setting
Enters a port number to be used on the secondary server.Secondary Server- Port
Number
Specifies a certificate file. Click Browse, and then specify a certificate file.Secondary Server- Client
Certificate File Name
Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at
Transfer Protocol.
Enters a password for the client certificate. Up to 128 characters password can be
entered.
Secondary Server- Password
The restriction for the available values is the same as that of Primary Server- Server Setting.
Specifies a certificate file. Click Browse, and then specify a certificate file.Secondary Server- Root
Certificate File Name
Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at
Transfer Protocol.
Enters an arbitrary name for the storage system that transfers the audit log to the syslog
servers, so that you can identify the storage system. Enter 32 characters at the maximum.
Location Identification Name
Allowed characters are alphanumeric characters and symbols: ! " # $ % & ' ( ) * + - .
/ : ; < = > ? @ [ \ ] ^ _ ` { | } ~. A comma (,) and a space cannot be used.
Enters the time to detect the timeout of communication with the syslog server in the range
of 1 to 120 seconds. The default is 10 seconds.
Timeout
Inputs this item only when New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol
is specified.
Enters the retry interval when the communication with the syslog server fails in the range
of 1 to 60 seconds. The default is 1 second.
Retry Interval
Inputs this item only when New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol
is specified.
Enters the number of retry times when the communication with the syslog server fails in
the range of 1 to 50. The default is 3.
Number of Retries
Inputs this item only when New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol
is specified.
Selects whether to transfer the detailed information of the audit log to the syslog server.Output Detailed Information
• Enable:Transfer the detailed information to the syslog server.
• Disable: Do not transfer the detailed information to the syslog server.
In the syslog file that is stored in the SVP, the detailed information is always stored
regardless of this setting.
316 Audit log GUI reference