HP XP7 Audit Log User and Reference Guide (H6F56-96001)
Table Of Contents
- HP XP7 Audit Log User and Reference Guide
- Contents
- 1 Introduction
- 2 Using audit logs
- 3 Quick reference
- 4 Audit log examples
- Audit Log Descriptions
- ACM Descriptions
- BASE Descriptions
- [BASE] Certificate Update
- [BASE] ControlPanel Backup
- [BASE] ControlPanel Restore
- [BASE] Create Conf Report
- [BASE] Delete CVAE Info
- [BASE] Delete Reports
- [BASE] Delete Tasks
- [BASE] Disable Auto Delete
- [BASE] Edit Alert Setting
- [BASE] Edit SIM Syslog Serv
- [BASE] Edit Storage System
- [BASE] Edit System Options
- [BASE] Enable Auto Delete
- [BASE] Entry Tasks
- [BASE] Environment Setting
- [BASE] HCSSO Authentication
- [BASE] HCSSO SetOneTimeKey
- [BASE] Login
- [BASE] Logout
- [BASE] Release HTTP Block
- [BASE] Resume Tasks
- [BASE] Set CVAE Info
- [BASE] Set Up HTTP Block
- [BASE] Suspend Tasks
- [BASE] Unlock Forcibly
- [BASE] Update HCS Crt
- [BASE] Update SMIS CrtFiles
- [BASE] Upload SMIS ConfFile
- Parallel Access Volumes Descriptions
- E-Mail Descriptions
- Information Descriptions
- Install Descriptions
- [Install] Add Host Group
- [Install] Add LU Path
- [Install] Add WWN
- [Install] All Config
- [Install] Backup Config
- [Install] Change Host Group
- [Install] Change WWN
- [Install] DCR Prestaging
- [Install] Define Config.
- [Install] Delete DKC WWN
- [Install] Delete Host Group
- [Install] Delete LU Path
- [Install] Delete WWN
- [Install] Dku Emulation
- [Install] FlashDrive ORM Value
- [Install] Force Reset
- [Install] Format
- [Install] Format Stop
- [Install] Initialize ORM Value
- [Install] Install
- [Install] Install CV
- [Install] Machine Install Date
- [Install] Make Volume
- [Install] Micro Program
- [Install] MP Install
- [Install] M/F DCR
- [Install] Open DCR
- [Install] Remove
- [Install] Restore Config.
- [Install] Set Battery Life
- [Install] Set Channel Speed
- [Install] Set CommandDev
- [Install] Set CommandDevSec
- [Install] Set DevGrpDef
- [Install] Set Fibre Address
- [Install] Set Fibre Topology
- [Install] Set Host Mode
- [Install] Set IP Address
- [Install] Set Security Switch
- [Install] Set Subsystem Time
- [Install] Set UserAuth
- [Install] System Option
- [Install] System Tuning
- [Install] Update Config
- [Install] Volume to Space
- Local Replication Descriptions
- Maintenance Descriptions
- [Maintenance] Blockade
- [Maintenance] Correction Copy
- [Maintenance] DMA Restore
- [Maintenance] Drive Interrupt
- [Maintenance] DRR Restore
- [Maintenance] Format
- [Maintenance] Format Stop
- [Maintenance] MP Restore
- [Maintenance] PCB Restore
- [Maintenance] Pre QuickFormat Stop
- [Maintenance] Quick Format
- [Maintenance] Replace
- [Maintenance] Restore
- [Maintenance] Restore Data
- [Maintenance] Set Battery Life
- [Maintenance] Size Change
- [Maintenance] Spare Disk
- [Maintenance] Switch SVP
- [Maintenance] Transfer Config
- [Maintenance] Type Change
- [Maintenance] Verify
- [Maintenance] Verify Stop
- Monitor Descriptions
- Performance Monitor Descriptions
- Program Product Key (PP KEY) Descriptions
- Provisioning Descriptions
- [PROV] Add Hosts
- [PROV] Add LUN Paths
- [PROV] Assign MP Blade
- [PROV] Block LDEVs
- [PROV] Complete SIMs
- [PROV] Create Host Groups
- [PROV] Create LDEVs
- [PROV] Create Resource Grps
- [PROV] Create VDKC-Box
- [PROV] Create/Expand Pools
- [PROV] Delete Host Groups
- [PROV] Delete LDEVs
- [PROV] Delete Login WWNs
- [PROV] Delete LUN Paths
- [PROV] Delete Resource Grps
- [PROV] Delete VDKC-Box
- [PROV] DRU Expiration-Lock
- [PROV] Edit Cmd Dev(Auth)
- [PROV] Edit Cmd Dev(DevGrp)
- [PROV] Edit Cmd Dev(Sec)
- [PROV] Edit Command Devices
- [PROV] Edit DRU Attribute
- [PROV] Edit Host
- [PROV] Edit Host Grps(Mode)
- [PROV] Edit Host Grps(Name)
- [PROV] Edit LDEVs(tier)
- [PROV] Edit LDEV Tier Rank
- [PROV] Edit MP Blades
- [PROV] Edit Ports(Address)
- [PROV] Edit Ports(Attr)
- [PROV] Edit Ports(Security)
- [PROV] Edit Ports(Speed)
- [PROV] Edit Ports(Topology)
- [PROV] Edit Resource Grp
- [PROV] Edit SCP Time
- [PROV] Edit Tiering Policy
- [PROV] Edit VR Attribute
- [PROV] Edit V-VOL Option
- [PROV] Edit/Delete Pools
- [PROV] Edit/Delete UUIDs
- [PROV] Expand V-VOLs
- [PROV] Format LDEVs
- [PROV] Format LDEVs(H)
- [PROV] Format LDEVs(Q)
- [PROV] Initialize Pools
- [PROV] LDEV Name
- [PROV] Monitor Pools
- [PROV] Move Resources
- [PROV] Pool Name
- [PROV] Reclaim Zero Pages
- [PROV] Release HostReserved
- [PROV] Relocate Pool
- [PROV] Remove Hosts
- [PROV] Restore LDEVs
- [PROV] Restore Pools
- [PROV] Set FCSP Host
- [PROV] Set FCSP Port Info
- [PROV] Set FCSP Port Switch
- [PROV] Set FCSP Target
- [PROV] Set PageTieringLevel
- [PROV] Set SSID
- [PROV] Set Virtual LDEV
- [PROV] Shrink Pool
- [PROV] Stop Monitoring
- [PROV] Stop Reclm ZeroPages
- [PROV] Stop Relocating
- [PROV] Stop Shrinking Pool
- [PROV] VTOC
- Remote Maintenance Descriptions
- Remote Replication Descriptions
- [Remote Replication] Add path
- [Remote Replication] Add RCU
- [Remote Replication] Change JNL Option
- [Remote Replication] Change Mirror Option
- [Remote Replication] Change RCU Option
- [Remote Replication] Clear SIM
- [Remote Replication] Create Pairs
- [Remote Replication] Delete Cmd.Dev
- [Remote Replication] Delete Pairs
- [Remote Replication] Delete path
- [Remote Replication] Delete RCU
- [Remote Replication] Edit Options
- [Remote Replication] Edit Pair Options
- [Remote Replication] Journal Owner
- [Remote Replication] Journal Vol
- [Remote Replication] R-Cmd.Dev.
- [Remote Replication] Resync Pairs
- [Remote Replication] Split Pairs
- SNMP API Descriptions
- Performance Control Descriptions
- Spreadsheet Descriptions
- External Storage Descriptions
- [Ext Stor] Add External Volumes
- [Ext Stor] Assign MP Blade
- [Ext Stor] Delete ES VOLs
- [Ext Stor] Disconnect ES Paths
- [Ext Stor] Disconnect ES VOLs
- [Ext Stor] Edit ES Path Config
- [Ext Stor] Edit ES VOLs
- [Ext Stor] Edit External WWNs
- [Ext Stor] Merge ES Path Grps
- [Ext Stor] ProfileUpgrade
- [Ext Stor] Reconnect ES Paths
- [Ext Stor] Reconnect ES VOLs
- [Ext Stor] Split ES Path Grp
- Auto LUN Descriptions
- Cache Partition Descriptions
- Volume Shredder Descriptions
- Compatible XRC Descriptions
- HDD Easy Replace Descriptions
- 5 Audit log examples for encryption key operations
- ENC Descriptions
- [ENC] Add keys to DKC
- [ENC] Backup Keys
- [ENC] Backup Keys to File
- [ENC] Backup Keys to Serv
- [ENC] Change CEK Status
- [ENC] Change DEK Status
- [ENC] Clear Keys
- [ENC] Create KEK Dynamic
- [ENC] Create Keys
- [ENC] Create Keys
- [ENC] Create Keys On Serv
- [ENC] DEK assign SpareDisk
- [ENC] DEK delete
- [ENC] Delete KEK Dynamic
- [ENC] Delete Keys
- [ENC] Delete Keys
- [ENC] Delete Keys on Serv
- [ENC] Edit Encryption
- [ENC] Edit ENC Settings
- [ENC] Edit Password Policy
- [ENC] Register KEK Dynamic
- [ENC] Rekey CEK
- [ENC] Rekey KEK Dynamic
- [ENC] Restore Keys
- [ENC] Restore Keys fr File
- [ENC] Restore Keys fr Serv
- [ENC] Retry KEK Dynamic
- [ENC] Set Up Key Mng Serv
- [ENC] Use Keys for CEK/KEK
- KEK Acquisition Descriptions
- ENC Descriptions
- 6 Audit log examples of commands sent from hosts, computers using RAID Manager, or hosts using Business Continuity Manager
- Config Command (Open system)
- Add Copy Group
- Add Device Group
- Add Device Group(Nick Name)
- Add TP Pool
- Add External Group
- Add Host Group
- Add Journal(Ldev)
- Add Ldev
- Add Ldev(Thin Provisioning)
- Add Ldev(Snapshot)
- Add LUN
- Add Path
- Add RCU
- Add RCU Path
- Add Resource(Group)
- Add Resource/Delete Resource
- Add Snap Pool
- Add Snapshot
- Add PFC Group
- Add PFC WWN
- Add SSID
- Add WWN
- Check External Storage Group
- Check External Storage Path
- CTQM
- Delete Copy Group
- Delete Device Group
- Delete External Group
- Delete Host Group
- Delete Journal
- Delete Journal(Ldev)
- Delete Ldev
- Delete LUN
- Delete Path
- Delete Pool
- Delete Pool(Ldev)
- Delete RCU
- Delete RCU Path
- Delete Resource(Group)
- Delete Snapshot
- Delete PFC Group
- Delete PFC WWN
- Delete PFC WWN(Nick Name)
- Delete SSID
- Delete WWN
- Disconnect External Group
- Disconnect Path
- Extend Ldev
- Initialize Ldev(Format)
- Initialize Ldev(Shredding)
- Initialize Ldev(Stop Shredding)
- Map Resource(LDEV)
- Map Resource(Port)
- Modify CLPR
- Modify Device Group(Name)
- Modify External Group(ALUA Switch)
- Modify External Group(Cache Inflow)
- Modify External Group(Cache Mode)
- Modify External Group(Load Balance Mode)
- Modify External Group(MP Blade)
- Modify Host Group(Host Mode)
- Modify HostGroup(Host Mode Option)
- Modify Journal
- Modify Journal(MP Blade)
- Modify Ldev(Blocked)
- Modify Ldev(CLPR)
- Modify Ldev(Command Device)
- Modify Ldev(Discard Zero Page)
- Modify Ldev(MP Blade)
- Modify Ldev(Nick Name)
- Modify Ldev(Restore)
- Modify Ldev(SSID)
- Modify Ldev(Tier)
- Modify Pool Attribute
- Modify Pool(Restore)
- Modify Pool(Threshold)
- Modify Port
- Modify Port Attribute
- Modify RCU
- Modify Snapshot(Restore)
- Modify Snapshot(Resync)
- Modify Snapshot(Split)
- Modify PFC Group
- Modify PFC WWN
- Modify PFC WWN(NickName)
- Monitor Pool
- Paircreate
- Pairresync
- Pairsplit
- Pairsplit-S
- Reallocate Pool(Start)
- Reallocate Pool(Stop)
- Rename Pool
- Reset Command Status
- Reset Ldev Priority
- Reset WWN
- Set Ldev Priority
- Set WWN
- Stop Monitor Pool
- Unmap Resource(LDEV)
- Unmap Resource(Port)
- Config Command (Mainframe system)
- FC-SP
- User Auth
- Config Command (Open system)
- 7 Support and other resources
- A Audit log user operations
- B Audit log SVP operations
- C Audit log GUI reference
- Glossary
- Index
DescriptionItem
Indicates whether to use a secondary LDAP serverSecondary Server
Enable: Use the secondary server
Disable: Do not use the secondary server
Indicates the host name of the secondary LDAP serverSecondary Host Name
Indicates the port number of the secondary LDAP serverSecondary Port Number
The number of external authentication servers that are setNum. of Servers
Example 3
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[ACM],Setup Server,RADIUS,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Authentication Protocol,Primary Host Name,NAS Address,
Primary Port Number,Timeout,Number of Retries,Secondary Server,
Secondary Host Name,Secondary Port Number}=
-{PAP,example1.com,
-10.213.74.20,1812,10,3,Enable,example2.com,1812}
++{External User Group Mapping,Certificate File Name,
Authentication Protocol,DNS Lookup,Host Name,Port Number,
Domain Name,Base DN,Search User's DN,Timeout,Retry Interval,
Number of Retries}=
-{Enable,CFFILE,STARTTLS,Disable,
-example.com,389,example1.com,
-dc=example2 dc=com,example3.com,10,1,3}
+Num. of Servers=1
Basic Information for Example 3
DescriptionParameter
Indicates that the RADIUS server is used as the External Authentication server.RADIUS
Detailed Information for Example 3
DescriptionItem
Indicates the RADIUS protocol to useAuthentication Protocol
PAP: password authentication protocol that transmits plaintext user ID and password
CHAP: challenge-handshake authentication protocol that transmits encrypted password
Indicates the host name of the RADIUS serverPrimary Host Name
Indicates the identifier for the RADIUS server to find SVPNAS Address
Indicates the port number of the RADIUS serverPrimary Port Number
Indicates the number of seconds before connection to the RADIUS server times outTimeout
Indicates the number of times that the system tries to reconnect to the server when the
connection to the RADIUS server fails
Number of Retries
Indicates whether to use a secondary RADIUS server or a secondary LDAP serverSecondary Server
Enable: Use the secondary server
Disable: Do not use the secondary server
Indicates the host name of the secondary RADIUS serverSecondary Host Name
Indicates the port number of the secondary RADIUS serverSecondary Port Number
54 Audit log examples