HP XP7 Audit Log User and Reference Guide (H6F56-96001)

[BASE] Environment Setting
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,0,,
[BASE],Environment Setting,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{RMI time-out period,RMI time-out period for Modify,
Polling period for checking exclusive lock,
Polling period for checking obstacles}={1,10,5,5}
Detailed Information
DescriptionItem
RMI time-out periodRMI time-out period
RMI time-out period for ModifyRMI time-out period for
Modify
The polling period for checking exclusive lockPolling period for
checking exclusive lock
The polling period for checking obstacle statusesPolling period for
checking obstacles
[BASE] HCSSO Authentication
Example 1: When SSO authentication is succeeded
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,0,,
[BASE],HCSSO Authentication,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
* "0" is always output in the connection number.
Example 2: When SSO authentication failed
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,0,,
[BASE],HCSSO Authentication,,Error(xxxxx-yyyyyy),
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
* "0" is always output in the connection number.
[BASE] HCSSO SetOneTimeKey
Example 1: When authentication failed in issuance of OneTimeKey
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,0,,
[BASE],HCSSO SetOneTimeKey,Authentication,Error(xxxxx-yyyyyy),
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
* "0" is always output in the connection number.
Example 2: When the number of registered OneTimeKeys exceeds the maximum
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,0,,
[BASE],HCSSO SetOneTimeKey,OneTimeKey EntryOver,
Error(xxxxx-yyyyyy),from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,
Seq.=xxxxxxxxxx
* "0" is always output in the connection number.
BASE Descriptions 63