HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information for Example 6
DescriptionItem
The installed location of the SVPSVP
IP address in the SVPIPAddress
The subnet mask in the SVPSubnet Mask
The duplex status of the SVP.Use Duplex
Valid or Invalid will appear.
The kind of the duplex status.SVP Kind
Master SVP or Standby SVP will appear.
The status of IPv4 settings.IPv4
Valid or Invalid will appear.
The status of IPv6 settings.IPv6
Valid or Invalid will appear.
Master SVP details are provided in the format described below.M-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet
Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
IPv6(IPAddress, Subnet
Prefix length)
Standby SVP details are provided in the format described below.S-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet
Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
IPv6(IPAddress, Subnet
Prefix length)
Example 7: Installing additional SM PP Flag
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Install,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PP Flag=[(64KLDEV, SI/VM Extension, TPF),(TC/UR)],
Num. of PP Flags=2
+Max Number of CUs=255
Detailed Information for Example 7
DescriptionItem
The flag of the program productPP Flag
The number of flags of the program productNum. of PP Flags
The maximum number of CUsMax Number of CUs
[Install] Install CV
This logged information indicates that the formatting was only requested but not completed. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
86 Audit log examples