HP XP7 Audit Log User and Reference Guide (H6F56-96001)

[Install] Remove
Example 1: removing a channel adapter (CHA)
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{CHA,Kind}
=[{CHA-1PC,16FC8(Fibre )},{CHA-2PU,16FC8(Fibre )}],
Num. of CHAs=2
Detailed Information for Example 1
DescriptionItem
The Channel Adapter mounting locationCHA
The kind of PCB mountedKind
The number of Channel AdaptersNum. of CHAs
Example 2: removing a Disk Adapter (DKA)
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{DKA,Kind}=[{DKA-1PB,DKA (4Port)},{DKA-1PH,DKA (4Port)},
{DKA-2PB,DKA (4Port)},{DKA-2PH,DKA (4Port}],Num. of DKAs=4
Detailed Information for Example 2
DescriptionItem
The Disk Adapter mounting locationDKA
The type of Disk AdapterKind
The number of Disk AdaptersNum. of DKAs
Note: Only the changed items are output.
Example 3: removing an ECC Group or an LDEV
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+DKU=[DKU-01],Num. of DKUs=1
+PG=[1-6,1-7],Num. of PGs=2
+{B4,SPARE}=[{1,1}],Num. of SPAREs=1
Detailed Information for Example 3
Only the changed items are output. The detailed information on the recovery process is not output
when the setting at the time of removing before the recovery process is complete. However, when
the setting is not complete, the setting on the recovery process is output as the detailed information.
DescriptionItem
The Disk Unit mounting locationDKU
The number of Disk UnitsNum. of DKUs
The parity group numberPG
The number of parity groupsNum. of PGs
Install Descriptions 91