HP XP7 Audit Log User and Reference Guide (H6F56-96001)

from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{MPB,Auto LDEV Assignment}
=[{MPB-1MB,Disable},{MPB-2MB,Enable},{MPB-1MD,Enable},
{MPB-2MD,Enable}],Num. of MPBs=4
+{CM,CMG,Size}=[{1CC/2CC,CM16G x 2,0}],Num. of CMs=1
+{BKM,Type,Size}=[{1BC/2BC,----------,0}],Num. of BKMs=1
+DCR available size=1024
+{CLPR,Cache size,DCR size,Extent Number}
=[{CLPR0,177664,0,16384}],Num. of CLPRs=1
Detailed Information for Example 5
DescriptionItem
The installed location of the MPBMPB
The attribute of auto LDEV assignmentAuto LDEV Assignment
The number of MPBsNum. of MPBs
The mounting location of the PCB for cache memoryCM
The capacity of the CMGCMG
The capacity of the cache memorySize
The number of cache memoriesNum. of CMs
The mounting location for BKMBKM
The type of BKMType
The size of CFMSize
The number of BKMsNum. of BKMs
The capacity of the Cache ResidencyDCR available size
The CLPR numberCLPR
The capacity of the cache memory allocated to CLPRCache size
The capacity of the Cache Residency allocated to CLPRDCR size
The number of extents allocated to CLPRExtent Number
The number of CLPRsNum. of CLPRs
Example 6: removing SVP
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,SVP,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SVP}={SVP-OPTION}
+{IPAddress,Subnet Mask}={(123.456.789.123),(255.255.255.255)}
+Use Duplex=Invalid
+Svp Kind=Master SVP
+IPv4=Valid
+IPv6=Valid
+{M-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((111.222.333.444),(255.255.255.255)),
((1111:2222:3333:4444:5555:6666:7777:8888),(64))}
+{S-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((555.666.777.888),(255.255.255.255)),
((9999:AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:0000),(64))}
Install Descriptions 93