HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Basic Information
DescriptionParameter
The SVP IP address changeSVP
The IP address change of the SVP and DKCSVP and DKC
Detailed Information
DescriptionItem
The SVP IP addressIPAddress
The subnet mask in SVPSubnet Mask
Indicates whether the Duplex setting in SVP is valid or invalidUse Duplex
Valid: Valid, Invalid: Invalid
The kind of duplicated SVPSVP Kind
Master SVP: Master SVP, Standby SVP: Standby SVP.
The status of IPv4IPv4
Valid: enabled, Invalid: disabled
The status of IPv6IPv6
Valid: enabled, Invalid: disabled
Master SVP details are provided in the format described belowM-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet
Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
IPv6(IPAddress,Subnet
Prefix length)
Standby SVP details are provided in the format described belowS-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet
Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
IPv6(IPAddress,Subnet
Prefix length)
[Install] Set Security Switch
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Security Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Detailed Information
DescriptionItem
The name of the port where the LUN security setting is changedPort
Indicates whether the LUN security setting is enabled or disabled.Switch
Disable or Enable will appear.
The number of ports where the LUN security setting is changedNum. of Ports
Install Descriptions 99