HP XP7 Auto LUN User Guide (TK915-96001)

Table 2 Candidates for source and target volumes by program product (continued)
Target Volume Candidate?Source Volume Candidate?Volume Type/StatusProgram Product
NoYesA secondary volume in a BC
pair where the primary
volume to secondary volume
ratio is 1:1, 1:2, or 1:3
NoYesA primary volume in an L1
cascaded BC pair where the
primary volume to
secondary volume ratio is
1:1 or 1:2
NoNoA primary volume in an L1
cascaded BC pair where the
primary volume to
secondary volume ratio is
1:3
NoYesA primary volume in an L2
cascaded BC pair where the
primary volume to
secondary volume ratio is
1:1
NoNoA primary volume in an L2
cascaded BC pair where the
primary volume to
secondary volume ratio is
1:2
NoYesA secondary volume in an
L1 cascaded BC pair where
the primary volume to
secondary volume ratio is
1:1, 1:2, or 1:3
NoNoA secondary volume in an
L2 cascaded BC pair where
the primary volume to
secondary volume ratio is
1:1 or 1:2
NoNoA volume in
COPY(SP)/COPY or
PSUS(SP)/PSUS status
Business Copy
NoNoA volume in SP-Pend/TRANS
or V-Split/SUSPVS status
Business Copy Z
NoNoA volume with data stored
in cache
Cache Residency and
Cache Residency Z
NoNoA volume undergoing an
Auto LUN operation via
RAID Manager
RAID Manager
NoYesA volume that LU path is not
set to
NoNoA volume having the Read
Only or Protect attribute
turned on
Volume Retention
NoNoA volume having the Read
Only or Protect attribute
turned on
Data Retention
Supported and prohibited source and target volumes 11