HP XP7 Continuous Access Journal for Mainframe Systems User Guide (TK911-96001)

DescriptionError code (SSB2)
The command was rejected because the specified P-VOL or S-VOL is in the process of having the
capacity changed by Thin Provisioning Z.
EAE5
The command was rejected because the pair was in the state that was unavailable to transit.EAF6
The Cnt Ac-J Z pair for the delta resync operation cannot be created because the specified Cnt
Ac-J Z S-VOL is in either one of the following statuses:
EB24
• Cnt Ac-J Z volume for the delta resync operation.
• The status of the Cnt Ac-J Z pair is other than Duplex.
The Cnt Ac-J Z pair for delta resync operation cannot be created because the specified Cnt Ac-J
Z S-VOL is in either one of the following statuses:
EB25
• The volume cannot be used as the Cnt Ac-J Z volume for the delta resync operation.
• The status of the Cnt Ac-J Z pair is the status other than Duplex or SUSPEND.
The command was rejected because the Cont Access Journal 3DC & 4x4 Open MF program
product was not installed in the secondary system.
EB28
The command was rejected because the delta resync settings are configured to the primary and
secondary systems.
EB29
The command was rejected because shared memory for operating Cnt Ac-J Z is not installed.EB2D
The command was rejected because the specified Cnt Ac-J Z pair was used in the system that
consists of multiple primary and secondary systems.
EB2F
The command was rejected because the specified mirror ID was invalid.EB30
The command was rejected because the microcode is being exchanged or the micro program
exchange operation is suspended.
EB37
The specified Cnt Ac-J pair cannot execute the takeover because the specified Cnt Ac-J pair
belongs to the journal that dedicated Cnt Ac-J and Continuous Access Synchronous combination
(2DC configuration).
EB45
A delta resync pair cannot be created due to one of the following reasons.EB48
• P-VOL of the Cnt Ac-J Z pair is different from P-VOL of the Continuous Access Synchronous Z
pair.
• The serial number of the primary system that is recognized by P-VOL and S-VOL is different.
The command was rejected because the secondary system did not support the delta resync
function.
EB49
A pair cannot be created because the restore journal was not registered.EB4C
A pair cannot be created because the master journal was not registered.EB4D
The Cnt Ac-J Z pair cannot be created because the timer type of master journal and restore journal
is different.
EB4F
The command was rejected because the specified S-VOL was not mounted.EB50
The command was rejected because PIN data existed in the specified S-VOL.EB51
The command was rejected because the specified S-VOL cannot be accessed.EB52
The command was rejected because the specified S-VOL is blocked.EB53
The command was rejected because the specified S-VOL was online from the host.EB57
The command was rejected because the specified journal volume or S-VOL was reserved or being
used in the storage system. Please check the status of the volume.
EB58
The command was rejected because the specified S-VOL was being migrated by Auto LUN.
Please check the status of the volume.
EB59
126 Cnt Ac-J Z troubleshooting