HP XP7 Continuous Access Journal for Mainframe Systems User Guide (TK911-96001)

Continuous Access Journal Z SIMs are displayed in the Remote Web Console Status window.
• SIMs generated by the primary system include the P-VOL device ID (byte 13).
• SIMs generated by the secondary system include the S-VOL device ID (byte 13).
The figure below shows a typical 32-byte SIM from the system. The six-digit reference code consists
of bytes 22, 23, and 13. The reference code identifies the possible error and determines the
severity. The SIM type (byte 28) indicates the component that experienced the error. When the
value of byte 22 is 21, the SIM is a control unit SIM. When the value of byte 22 is Dx (where x
is an arbitrary character), the SIM is a device SIM.
Figure 17 Typical SIM with reference code and SIM type
The following table shows SIM reference codes, and provides useful information for identifying
issues and determining the system experiencing the problem. All SIMs are reported to the host,
except 21 80, 21 81, and possibly DC EX—depending on the value set for system option mode
598. For more information, see “System option modes ” (page 37).
SVP log fileSystem generating the
SIM
DescriptionSeverityReference code
Byte 23Byte 22
SIM LogLocal/RemoteA remote path is blocked due to failure.Moderate8021
SSB LogLocal/RemoteThe remote path is restored.Service8121
SIM LogLocal/RemoteA line failure is reported by the extender.Moderate8221
SIM LogLocalThe P-VOL has been suspended.Serious0XDC
Path recovery is impossible.
SIM LogLocalThe P-VOL has been suspended.Serious1XDC
A failure has been detected in the primary
system.
SIM LogLocalThe P-VOL has been suspended.Serious2XDC
A failure has been detected in the
secondary system.
SIM LogLocalThe P-VOL has been suspended.Serious4XDC
The pair has been suspended at the
secondary system.
SIM LogLocalThe P-VOL has been suspended.Serious5XDC
A pair has been released at the
secondary system.
SIM LogLocalThe S-VOL has been suspended.Serious6XDC
Path recovery is impossible.
SIM LogRemoteThe S-VOL has been suspended.Serious7XDC
A failure has been detected in the
secondary system.
130 Cnt Ac-J Z troubleshooting