HP XP7 Continuous Access Journal for Mainframe Systems User Guide (TK911-96001)

DescriptionItem
Number of journal volumes registered in the journal.Number of Journal
VOLs
Total capacity of the journal’s journal volumes.Journal Capacity
Number of volumes associated with the journal. If the journal uses multiple mirror IDs, volumes
in mirrors with Hold, Holding, or Hold(Failure) status are not included.
Number of Data
VOLs
Total capacity of all the associated volumes. If the journal uses multiple mirror IDs, the capacity
of volumes in mirrors with Hold, Holding, or Hold(Failure) status is not included.
Data Capacity
Whether flow of update data to the journal volume is restricted by slowing the response to hosts.Inflow Control
Number of seconds the system will monitor write data to the journal volume when the journal
volume is full (100%). A hyphen (-) displays if Inflow Control is disabled.
Data Overflow
Watch
Whether journal data is stored in cache memory on the remote side (restore journal).Cache Mode
Cnt Ac-J Z only.Timer Type
Type of clock used for consistency time. Must be the same for primary and secondary systems.
Assign MP blade wizard
Use this wizard to assign a MP blade to a journal.
Assign MP blade window
Use this window to assign a MP blade to a journal.
For full information, see the procedure in “Assigning an MP blade to a journal” (page 67).
DescriptionItem
Options for selecting an MP blade, MPB0 thru MPB7. Availability depends on system
configuration.
MP blade
172 Cnt Ac-J Z GUI reference