HP XP7 Continuous Access Journal for Mainframe Systems User Guide (TK911-96001)

Delete Mirrors wizard
Use this wizard to delete mirrors.
Delete Mirrors window
Use this window to delete mirrors.
For full information, see the procedure in “Deleting pairs in a mirror ” (page 77).
DescriptionItem
Journal identifier.Journal ID
Mirror’s identifierMirror ID
Journal copy type, Cnt Ac-J or Cnt Ac-J Z, plus one of the following journal type options:Journal Type
• Standard, a normal pair
• 2DC cascade
If Standard is the journal type option, then only the copy type displays.
Journal type options are defined in the Create Journals window.
Mirror’s attribute — Master, Restore, or Initial.Attribute
• Master displays when the P-VOL is paired (initial copy performed).
• Restore displays when the S-VOL is paired (initial copy performed).
• Initial displays when neither data volume is paired yet (initial copy not performed).
Mirror’s status.Status
Displays the following information about pair volumes in the system connected to the system
you accessed.
Remote Storage
System
• Model/Serial Number: Storage system model name and serial number.
• Journal ID: Journal identifier.
Path group identifier.Path Group ID
Number of volumes associated with the journal.Number of Data
VOLs
Total capacity of all the data volumes. If the journal uses multiple mirror IDs, the capacity of
volumes in mirrors with Hold, Holding, or Hold(Failure) status is not included.
Data Capacity
Delete Mirrors wizard 199