Getting Started Guide

Creating Movies Using muvee autoProducer 93
Selecting video scenes with Magic Moments
You can mark specific scenes in your video footage to include or leave out of your
final movie with the magicMoments feature in muvee autoProducer.
Video footage left unmarked is still analyzed when you make the movie and may be
included in the final version of the movie.
Using the magicMoment controls
The magicMoments window uses the following controls:
• The green thumbs-up button is for marking scenes that must be included in the
movie.
• The red thumbs-down button is for marking scenes that must be left out of the
movie.
• The gray thumb button is for undoing scenes that were marked with the thumbs-
up or thumbs-down buttons.
• The arrow buttons are for navigating backward and forward through the video
footage.
Using magicMoments to select video scenes
For best results with the production of your movie:
• Keep the total duration of magicMoments to less than 50 percent of the
duration of your movie. It is best to select only a few scenes.
• Make sure magicMoments do not cross scenes. This could result in poor scene
transition appearance.
• Keep each magicMoment to less than 10 seconds.
1 If your project is already open, click the video/pictures button, and skip to
step 4.
2 Click Start, choose All Programs, muvee autoProducer, and then click
muvee autoProducer again.
3 Open a project by selecting from the File menu Open Project.