Getting Started Guide

22 Getting Started Guide
Retasking audio connectors using the Audio
Wizard (6-connector)
When you click the Audio Wizard button, a window opens that shows the three
audio connectors on the front of the PC.
To enable the Audio Wizard select the Enable auto detection check box, and
click OK.
With the Audio Wizard enabled, both the Microphone connector (B) and the
Headphones connector (C) on the front of the PC can be retasked to perform a
different audio function. These two connectors are universal audio jacks. When you
plug in a cable, the wizard asks you to select the function for the cable from a list,
and then it sets the universal audio jack to perform as the selected function. The
functions are:
• Stereo speaker (Out)
• Microphone (In)
• Headphone (Out)
• Audio Line In
NOTE: The connectors on the front of your PC may vary; look for the connector icon
and color.
Connector Name Icon Color
A Audio Line In Light blue
B Microphone Pink
C Headphones
Or
Audio Line Out
Lime
green
A B C
C
A
B
/
IN
OUT
Or