HP Pavilion Desktop PCs - (English) Quick Start Guide SEA/ANZ/INDIA PAV SUM03 5990-5722

40
HP Pavilion home PC
Filename: ma3rbqs.doc Title: HP-Print2k.dot
Template: HP-HTML.dot Author: JimL Last Saved By: kimt
Revision #: 42 Page: 40 of 148 Printed: 04/01/03 03:12 PM
Disabling the TV option
When you want to disconnect the TV from the
computer, you may need to disable the TV option
to return your computer display to its original
resolution.
To disable the TV option:
1 Right-click an empty area of the screen.
2 Click Properties.
3 Click the Settings tab.
4 Click the Advanced button.
5 Click the nView tab, click the nView Display
Mode in the list on the left, and then select the
Standard [Dualview] option.
Important:
If you viewed the PC image on just the
TV, do the following: With Standard
[Dualview] selected under nView Display
Mode, click the Device Settings button,
choose Select Output Device, and then
select the Analog Display option.
6 Click the OK button, and then click OK again.
7 When the PC image appears on the monitor
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
Disconnecting the TV
1 Disable the TV option. See the previous
procedure.
2 Turn off the TV and the PC.
3 Remove the video cable at the TV and the PC.
4 Remove the audio cable at the TV and the PC.
5 Reconnect your computer speaker cable to the
Line Out jack (lime green connector) on the
back of the computer.