HP Pavilion Desktop PCs - (English) Quick Start Guide SEA/ANZ/INDIA PAV SUM03 5990-5722

42
HP Pavilion home PC
Filename: ma3rbqs.doc Title: HP-Print2k.dot
Template: HP-HTML.dot Author: JimL Last Saved By: kimt
Revision #: 42 Page: 42 of 148 Printed: 04/01/03 03:12 PM
Standby mode also allows faxes to come
through to the PC, and it enables the PC
to automatically retrieve e-mail messages and
download information from the Internet, if you
have programmed the PC to do so.
To manually put the PC in standby:
1 Press the Standby button on the keyboard.
The screen goes dark, and the PC goes
into standby mode.
2 When you want to use the PC again, press a
key on the keyboard, or press the Standby
button. The screen display reappears just as
you left it.
Another way to manually put the PC into standby
is to:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Click Stand By.
If the PC does not work properly when you wake
it from standby, reset the PC: Press and hold the
On button on the front of the PC for
approximately 5 seconds until the system turns
off. Then turn the PC back on.
Note:
Using the On button to reset the system is not
recommended and should be used only as a
last resort.
Hibernation mode
When the PC is in hibernation mode, it saves
everything that is in PC memory to the hard disk,
turns off the monitor and the hard disk, and then
turns itself off. When you turn on the PC,
everything (programs, folders, and documents) is
restored to the screen.