user’s guide
The information in this document is subject to change without notice. ® Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
table of contents finding answers to commonly asked questions .............................. 1 safety information .........................................................................................2 setting up your pc .......................................................................... 3 putting your pc together ................................................................................3 safety and comfort ....................................................................................
using the mouse ......................................................................................... 19 scrolling ................................................................................................ 20 autoscrolling .......................................................................................... 20 panning ................................................................................................ 20 switching mouse button functions ............................................
using a microphone ....................................................................................44 adjusting microphone volume...................................................................45 using the microphone with multi-channel audio...........................................45 working with digital images .........................................................................46 using hp image zone ..............................................................................
using application recovery and system recovery .......................... 85 creating recovery cds/dvds ......................................................................... 88 using recovery cd-dvd creator ...................................................................... 89 using the recovery tools cd .......................................................................... 90 system restore ............................................................................................
upgrading and servicing the pc (2) ............................................. 119 chassis features of the pc ...........................................................................119 opening the computer ...............................................................................120 before you begin ..................................................................................120 removing the side panel ........................................................................
viii user’s guide
finding answers to commonly asked questions In this User’s Guide, you can find answers to questions about the following topics: • Connecting to the Internet, page 32 • Registering your product, page 11 • Creating a CD, page 57 Saving documents, photos, and videos on a CD, page 57 Recording a music CD, page 58 Copying a CD, page 57 Backing up your files to a CD, page 58 • • • • • • • • • Watching movies on your PC, page 55 Connecting to a TV, page 60 Getting digital pictures onto your PC, page 46 Connecti
safety information This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to earth, according to IEC 60950). ac power safety warnings WARNING: Install the PC near an AC outlet. The AC power cord is your PC’s main AC disconnecting device and must be easily accessible at all times. For your safety, the power cord provided with your system has a grounded plug.
setting up your pc putting your pc together Follow the quick setup poster to set up your PC. Look in the PC box for printed details or updates regarding your model PC. When placing your PC, consider an ergonomic arrangement of the PC and your work area to maintain your comfort and productivity. Refer to “safety and comfort” on page 4. WARNING: The power supply is pre-set for the country/region in which you purchased your PC.
5 Connect the modem cable to the telephone line wall jack and to the modem (select models only) on the back of the PC. Refer to “connecting the modem” on page 8 for details. 6 Turn on the monitor. Turn on the PC. Turn on the speakers. Follow the onscreen instructions and complete the initial windows until you see the desktop. Refer to “turning on your pc for the first time” on page 10 for details. 7 Restart the PC: Click the Start button on the taskbar, click Turn Off Computer, and then click Restart.
computer safety warning WARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users. It also provides important electrical and mechanical safety information. To view the Safety & Comfort Guide: • Click Start, choose All Programs, choose PC Help & Tools, and then click Safety & Comfort Guide. Or • Type http://www.hp.
NOTE: PCs use software drivers to control peripheral devices. When you add a Plug and Play (ready to use) peripheral, memory, or add-in card, the PC automatically loads the correct driver for the device. NOTE: For peripherals that are not Plug and Play, follow the instructions that came with your peripheral device to load the appropriate driver.
pc front The front of your computer has the drives, the On button and hard disk drive activity indicator light. Some PC models also have connectors on the front of the PC. Your PC features and connector positions may vary. A CD storage B CD-ROM or CD-RW drive C DVD-ROM or DVD Writer drive D Diskette (floppy) drive E 7-In-1 memory card reader F FireWire (IEEE 1394) G USB 2.
connecting the modem The modem is used for connecting to an ISP that provides telephone dial-up connection to the Internet. NOTE: Your PC may not come with a modem. other ways to connect There are other ways to connect to the ISP that do not use the telephone modem, such as a LAN (Local Area Network) or DSL (Digital Subscriber Line). Check with your ISP for specifics on your connection. Check with your ISP for specifics on your connection.
To connect the cable between the modem and the telephone service line: 1 Plug one end of a modem cable (D) into the modem connector (A) on the back of the PC (C). This connector may be labeled with either Line or a modem connector symbol. 2 Plug the other end of the cable (D) into the telephone service line jack (E) on the wall. You can also connect a telephone (F) to the other connector (B) on the modem (select models only).
To connect the Ethernet connector to the network: 1 Plug the network cable into the Ethernet connector (A) on the back of the PC. WARNING: Do not plug the telephone service line cable or modem cable into the Ethernet connector. Although the plug looks similar to the plug on the Ethernet cable, they are not the same. 2 Plug the other end of the Ethernet cable into a 10BaseT or a 100BaseT port on the network hub. NOTE: Hubs are devices that can connect PCs to a network.
6 Refer to the following section, “registering your pc,” for information on completing the registration process (select models only). 7 Double-click the large Internet Access icon on your desktop, if it is present. Wait until the PC displays the Easy Internet Sign-up window, and then follow the onscreen instructions. 8 Restart the PC: Click Start on the taskbar, click Turn Off Computer, and then click Restart. registering your pc You may be prompted to register the PC (select models only).
standby mode When the PC is in standby mode, it goes into a low-power state and the monitor is blank as if it is turned off. The advantages of using standby mode include: • You save time and electricity without having to wait for the PC to go through the normal startup routine when you wake it again. The next time you use the PC, any programs, folders, and documents that were open before you put the PC in standby will be available. • Your PC can receive faxes while in standby mode, if you set it to do so.
To put the PC into hibernation manually: 1 Click Start on the taskbar. 2 Click Turn Off Computer. 3 Press and hold down the Shift key on the keyboard, and click Hibernate. NOTE: If Hibernate is not present, you can set up your PC for hibernation; refer to steps 1 through 6 of “automatic standby or hibernation” on page 13. 4 When you want to use the PC again after hibernation, press the On button on the front of the PC.
making recovery cds/dvds Now is a good time to make your recovery discs; see “creating recovery cds/dvds” on page 88. installing software and hardware devices After you turn on the PC the first time and restart it (see page 10), you can install any software programs that came on CDs or DVDs included in the PC box (select models only). You may wish to install additional software programs or hardware devices on your PC. Restart the PC after installation.
learning the basics NOTE: To use your software, you must know how to use the mouse and keyboard. If necessary, see “using the mouse” on page 19 or see “using the keyboard” on page 21. beginning to use your software The operation of your PC is controlled by two kinds of software: • The Microsoft Windows XP operating system, which displays the desktop on the monitor and controls your PC’s hardware, peripherals, and software applications.
using the desktop The desktop has shortcut icons that make it easy to find the things you need. Icon Opens Use it to Help and Support (select models only) View onscreen Help information about your PC. Easy Internet Sign-up Set up a new or an existing Internet account. Recovery Start Application or System Recovery. HP Image Zone Manage and protect your still photos, scanned images, and video clips.
using hp organize software HP Organize software is a desktop tool you use to organize both your PC shortcuts and your favorite Internet destination links. You use it to organize the important things you do on the PC and the Internet, and to arrange it the way you want. HP Organize makes all your information available with just a few mouse-clicks. HP Organize looks like a window with multiple category frames.
using the all programs menu To find the software programs on your PC: 1 Choose Start. 2 Choose All Programs. organizing your all programs list You see folders organized according to task (select models only) when you: 1 Click Start. 2 Choose All Programs. A folder contains a list of items. Each item is actually a shortcut, or link, to a program, document, or another folder. The Music folder, for example, contains shortcuts to the programs you use to play music CDs.
using pc help & tools The PC Help & Tools folder (select models only) in the All Programs menu contains special utilities for PC owners. This folder also contains any onscreen guides included with your PC. To see the items in the PC Help & Tools folder: 1 Click Start on the taskbar. 2 Choose All Programs. 3 Choose PC Help & Tools. 4 Click an item to view it or use it. NOTE: If there are no guide titles listed in PC Help & Tools, your PC has no onscreen guides.
A Left button B Scroll wheel button (scrolling mouse only) C Right button Double-click means to press the left button on the mouse two times in a row. To double-click, you click the button (press it and then release it), and then quickly click it again. B A C NOTE: Your mouse may look different from the one shown here. You can switch the function of the left and right buttons for left-handed use. Refer to “switching mouse button functions” on page 21.
switching mouse button functions To switch the functions of the right and left mouse buttons: 1 Click the Start button. 2 Click Control Panel. 3 Click Printers and Other Hardware, if it is present. 4 Double-click Mouse. 5 Check Switch primary and secondary buttons on the Buttons tab. 6 Click Apply (using the new primary button), and then click OK. changing mouse pointer speed To change the speed of the cursor on the screen relative to the motion of the mouse: 1 Click the Start button.
internet keyboard 1 l l This keyboard enables you to: • • • • • Adjust speaker volume. • • • • Mute speaker sound. Customize the buttons to open programs and connect to Internet Web sites. Connect to the Internet (if you have an established Internet account). Search for information on the Internet. Place the PC into standby to save power. Start, pause, and stop playing a CD or DVD, skip to the previous or next track, record, and eject the disc tray (for two drives). Get support information.
internet keyboard 3 This keyboard enables you to: • • • • • Adjust speaker volume. Customize the buttons to open programs and connect to Internet Web sites. Search for information on the Internet. Find a file or program on the hard disk drive. Start and stop playing a CD or DVD, skip to the previous or next track, and eject the disc tray (top drive only). • Place the PC into standby to save power. • Connect to the Internet (if you have an established Internet account). • Mute speaker sound.
wireless keyboard set A wireless keyboard (B) uses a receiver/transmitter unit (A), instead of a connector cable, to communicate with your PC. The wireless keyboard, mouse (C), and receiver set is available with select models only. A Wireless receiver B Wireless keyboard C Wireless mouse A B C A light (D) on the receiver indicates receiver activity.
function keys l l The function keys, located above the main keys, are labeled F1 through F12. • Pressing F1 displays a Help window for the software program being used. • Pressing F3 displays a search window. F1 and F3 are available at all times. Other function key operations vary by software program. edit keys l l The edit keys are Insert, Home, Page Up, Delete End, and Page Down. Use these keys to insert and delete text and to quickly move the cursor on your screen.
numeric keys l l Press the Num Lock key to lock and unlock the numeric key functions: • When the Num Lock light on the keyboard is on, the numeric keys work in the same way as the number keys and arithmetic functions found on a basic calculator. • When the Num Lock light on the keyboard is off, the numeric keys are directional keys used to move the cursor or play games.
hp A B C D E F G H K M N P T S R l V W l NOTE: The number, location, and labeling of buttons vary by keyboard model. Figure Key Icon Feature Description Standby Puts PC into power-saving mode (screen is blank but PC is still on). To make screen reappear, press the Esc key, or press standby again. May take 10–30 seconds before screen reappears. User Switches between the PC users. HP Links to HP Web site. D Help Opens the Help and Support Center.
Figure Key Icon Feature H Shopping K Sports M Finance N Connect P Search R Chat S E-Mail T See figure following table Description Goes to popular Web sites. Can be reconfigured to open any site or software program. Media Controls (CD/DVD/MP3) Operates CD or DVD player: V Volume control (Volume knob or Volume Up and Volume Down buttons) Volume knob: Increases speaker volume when turned clockwise and decreases volume when turned counterclockwise.
customizing the buttons You can customize some of the special buttons on the keyboard (select models only) to open different programs or files, or to connect to favorite Web sites: 1 Click Start on the taskbar. 2 Choose Control Panel. 3 Click Printers and Other Hardware, if it is present. 4 Double-click Keyboard. 5 On the Buttons tab, double-click the button you want to change.
using a printer Refer to the user manual that came with your printer for instructions on connecting and using the printer. Printers receive instructions from your PC via software called printer drivers. In many cases your PC automatically finds the necessary printer driver. If it does not, follow instructions that come with your printer to install the specific printer driver that it requires.
using the internet This chapter discusses the Internet, how to use a browser and e-mail, and how to set up your Internet account. Use the Internet to search for and to find information or services on the Web, or to use an e-mail program to get, read, or send electronic mail messages. Hardware and software programs provided on your PC may vary. Your PC may come with: • • • • • • Access to the ISPs in your area. Internet Explorer Web browser. Outlook Express e-mail software program.
The World Wide Web (WWW), also called the Web, is a public part of the Internet used by individuals, companies, governments, and organizations. These individuals and groups have created millions of Web pages in support of their activities. A Web page is a file or group of files that a user can access by entering the Web page’s file location, or URL. The URL (Uniform Resource Locator) identifies a Web site location, typically in the form http://www.name.extension (for example, http://www.hp.com).
• Click Start, choose All Programs, choose Online Services, and click Internet Explorer. Use Easy Internet Sign-up (available on select models only) to sign up for a new or an existing ISP account; see “signing up for a new or an existing isp account using easy internet sign-up“ on page 33. The software programs for available ISPs are part of your PC. The Windows desktop may have a folder called Online Services, which includes icons for accessing various online services.
Once you are connected to the Internet, your browser displays the home Web page. You can go to a different Web site by entering its address (such as http://www.hp.com) in the address box in the Web browser and pressing Enter on your keyboard. Or, you can use the browser Search tool to search for references to a specific word or phrase on the Web. searching the internet Most browser programs include a search feature.
and when the password window appears, select the option always allow viewing or allow viewing only this time. To use Content Advisor: 1 Click Start on the taskbar, and then click Control Panel. 2 Click Network and Internet Connections, if it is present. 3 Double-click Internet Options. 4 Click the Content tab. 5 In the Content Advisor area, click Enable. 6 On the Ratings tab, click a category in the list, and then click and drag the slider bar until the rating level is set to the limit you want to use.
sending e-mail messages with outlook express 1 Click Start on the taskbar, and select the E-mail Outlook Express icon. NOTE: You can also press the E-Mail button on the keyboard to open Outlook Express (select models only). 2 Click the Create Mail icon. 3 Type in, or select from an address book, the address of each recipient. NOTE: E-mail addresses contain no spaces and have a period after the server name. Dashes and underscores are sometimes used. Capital letters may be required.
getting help help and support center Information about your PC is in the onscreen Help and Support Center (select models only). Here you can find links to driver updates, access to technical support options, and information about commonly asked questions. To open the Help and Support Center: 1 Press the Help button (select models only) on your keyboard. Or Click Start on the taskbar and choose Help and Support. 2 Choose HP Pavilion PC Help.
using updates from hp Updates from HP (select models only) is an Internet-based service provided by HP to bring you important information about your PC: • • • • Product notices System updates Tips Special offers for your PC Messages arrive while you’re connected to the Internet and may display an alert or a notice on your desktop. View messages as they arrive or read them later.
re-enabling messages When you re-enable the Updates from HP Service, the service runs whenever you are connected to the Internet, and you receive messages as they become available. To turn on the service: Double-click the Re-enable Updates from HP icon on the desktop. Or 1 Click Start on the taskbar. 2 Choose All Programs. 3 Choose PC Help & Tool. 4 Choose Updates from HP. 5 Click Re-enable Updates from HP.
online guides You can find online guides and information for your PC. To view online manuals for your PC: 1 Type the Support Web address from your Warranty & Support Guide into your browser address box, and press the Enter key on your keyboard. 2 In the search box, type your product name and number (Pavilion 734n, for example) and click the search arrow. The product number is on the lower front of the PC chassis or inside the CD storage area. 3 Click the manuals item to see a list of manuals for your PC.
working with sound, pictures, and video using speakers Speakers are included with the monitor (select models only), or are sold separately. For details on connecting stereo speakers to the PC, see the quick setup poster. NOTE: Speakers may be passive (no power button and no power cord) or active (power button or power cord). Your PC supports only active (powered) speaker systems; the speaker system must have its own power cord. A stereo speaker set is a left-right, 2-channel speaker system.
adjusting speaker volume Use the Volume icon on the taskbar to set speaker volume. Then you can adjust the volume using: • The volume knob or buttons on the keyboard (select models only). • The volume knob on the speakers (select models only). NOTE: If you do not see this Volume icon on the taskbar, click Start, choose Control Panel, click Sounds, Speech, and Audio Devices, if it is present, and then double-click Sounds and Audio Devices to open the Sounds and Audio Devices Properties window.
Connect speaker plugs for: 2 Speaker Mode 4/4.1 Speaker Mode 6/5.1 Speaker Mode Front speakers Front speakers Front speakers Not used for speakers Rear speakers Not used for speakers Not used for speakers Rear speakers To PC connector Audio Out (lime-green) Connector icon OUT Audio In (blue) IN Center/ subwoofer speakers Mic-1 (pink) Configure the audio output for the multi-channel speaker system by performing the following procedure.
4 Click the option for the number of speakers to match your multi-channel speaker system, and then click Apply. NOTE: To test the speakers (multi-channel speakers only), click the Test button. The WinDVD control panel shows the speaker number being used. Click Stop. 5 Click OK. NOTE: If you want to play a stereo DVD, change the audio properties of WinDVD to match the recorded DVD audio output. using a microphone Your PC comes with one microphone connector in the back of the PC.
6 Click the Advanced button in the Microphone column. If you do not see the Advanced button, select Options from the Recording Control window, and then click Advanced Controls. 7 Place a check in the Alternate Microphone check box. (This box may be labeled Mic2 Select or 1 Mic Boost.) 8 Click Close. 9 Click X (Close) on the upper-right corner of the Recording Control window.
working with digital images You can connect a digital image source, such as a digital camera or a digital video camera, directly to the PC or through a docking station. Digital picture files you copy or download from the device appear in the My Pictures folder. You can copy digital picture files from the memory cards used by digital cameras and other digital imaging devices by using the 7-In-1 memory card reader (select models only). Refer to “about the 7-In-1 memory card reader“ on page 48.
Tab or button Description My Images tab A user-friendly tool in which you can easily find, view, manage, and print single or multiple photos or video clips. From here, you select the images that you want to edit, use in projects, and share with family and friends. For more information, see manage your images in Help. Edit tab A tool for making changes to the images and video clips you selected in My Images. It provides basic editing features that might be all you need to manipulate your images.
about the 7-in-1 memory card reader Digital cameras and other digital imaging devices use memory cards, or media, to store digital picture files. The optional 7-In-1 memory card reader (select models only) can read and can write to six types of memory cards and the IBM Microdrive disk drive. The card reader is accessible on the front of the PC or located inside the front cover of the PC. It has two or four horizontal card slots which accept the memory cards and the microdrive disk drive.
1 Insert the media into the card slot until it stops. The in-use light (A) on the card reader lights, and the PC automatically detects the media. 2 The PC opens a window so you can use the media contents. You can copy files from or to the media. 3 When you are done, right-click the drive icon, select Eject, check that the inuse light is on but not blinking, and then remove the media. A steady light indicates that the PC is not reading or writing the media.
2-slot memory card reader CompactFlash I/II A In-use light F Upper slot G Lower slot F A G Card Insert Into 2-slot reader CompactFlash type I media Receptacle edge (holes) F (upper) CompactFlash type II media Receptacle edge (holes) F (upper) IBM Microdrive disk drive Receptacle edge (holes) F (upper) Secure Digital (SD) Memory Card Upside down (gold connector fingers up) G (lower) MultiMediaCard (MMC) Upside down (gold connector fingers up) G (lower) Memory Stick (MS) Memory Card Ups
handling cds/dvds To avoid damaging a disc, follow these guidelines: • Return the disc to the case when you are finished using it. • Handle the disc by its outside edges or center hole only. • Do not touch the unlabeled side of a disc or place the unlabeled side down on your desk. Doing so could scratch the surface of the disc. • Store discs at room temperature. inserting and removing cds and dvds CAUTION: Use only standard shaped discs in your drives.
4 Close the disc tray by: • Gently pushing the tray into the PC. Or • Clicking the close/open button on the control panel for the program (such as MusicMatch Jukebox or Windows Media Player) that controls the drive. Or • Pressing the media control open/close button or Eject button on the keyboard (select models only). Or • Pressing the Eject button on the drive, if it is accessible. To remove a CD or DVD: 1 With the PC turned on, open the disc tray by pressing the Eject button.
using the diskette (floppy) drive The diskette (floppy) drive is available on select model PCs. If your PC does not already have a diskette drive, you cannot add one to the PC chassis as an internal drive. Instead, purchase an external USB diskette drive or other external storage device to suit your needs. If your PC has a diskette (floppy) drive (select models only), you can use a 3.
To play a music CD: 1 Insert the music CD into the drive. • The MusicMatch Jukebox window opens. If the Audio CD wizard window opens, select MusicMatch Jukebox from the list. You may have to scroll down in the window to see MusicMatch. Or • If the MusicMatch window does not automatically open, click Start on the taskbar, choose All Programs, choose Music, choose MusicMatch and then click MusicMatch Jukebox. 2 To control the CD in the drive, click the CD tab at the top of the MusicMatch Jukebox window.
For more information on this software, refer to the online Help within the Windows Media Player: Click the Help menu in the Windows Media Player menu bar. If necessary, first display the menu bar by clicking the up-arrow icon in the upper left corner of the Windows Media Player window. dvd terms Title: Each DVD can hold one or more titles. Most full-length movies have only one title on the DVD, but some DVDs include several short movies, with each movie being a separate title.
You may want to start WinDVD and adjust the settings before inserting the disc and starting the movie. To start WinDVD without a disc in the drive: 1 Click Start on the taskbar. 2 Choose All Programs. 3 Choose Video. 4 Click InterVideo WinDVD Player. 5 Click InterVideo WinDVD 4. The WinDVD video window and control panel opens. NOTE: If you are playing a movie full screen and the WinDVD control panel is hidden, you can redisplay it by clicking anywhere in the video window.
WARNING: You can change countries/regions only five times before the country/region code locks and becomes permanent. Once the code locks, you can play DVDs from that country/region only. If the country/region code locks, and you need help, contact Support.
creating a music cd RecordNow! creates closed session music CDs, which means you must record all music files on one CD in one recording session. Music files can be recorded repeatedly on a rewriteable CD-RW disc, but all previously recorded files must be erased first. CD-R discs cannot be erased. See “getting started with recordnow!” on page 57. NOTE: CD-R discs play in most home and car stereos. CD-RW discs play only in some stereos.
creating (burning) music cds with windows media player NOTE: HP supports lawful use of technology and does not endorse or encourage the use of our products for purposes other than those permitted by national copyright law. Your PC has recording software called Windows Media Player. You copy or download music to the Windows Media Player Media Library and can then organize or copy the music files. You can copy Window Media files that have a .wma extension, .mp3 files, or .
4 Click My Computer in the Other Places list and then double-click the disc drive you want to use. 5 Insert a blank disc into the drive. 6 Click Write these files to CD in the CD Writing Tasks list. The CD Writing Wizard window appears. 7 Click Next. 8 Click Finish. creating (burning) dvds using the dvd writer drive The DVD Writer drive (select models only) plays movie DVDs and music CDs, reads data CDs and DVDs , and records (burns) files to DVD+RW, DVD+R, CD-R, and CD-RW discs.
connecting to a tv set To use your TV as a PC screen: 1 Turn off the PC. 2 Connect the TV cable using one of the following arrangements, depending on the connection jacks on your TV: • If your TV has an S-video jack, connect an S-video cable from the S-video In jack on the TV to the S-video jack on the back of the PC.
NOTE: The S-video adapter cable is only needed if there is no composite video jack on the back of the PC. 3 To have sound come from your TV instead of from your PC, plug an audio cable into the Audio input jack (Line In) on the TV and plug the other end of the audio cable into the Audio Out jack (green connector) on the back of the PC. viewing the pc image on your tv screen NOTE: The type of video card on your PC determines how the PC selects the TV-out option.
disabling the tv option When you want to disconnect the TV from your PC, you may need to disable the TV option to return your PC display to its original resolution. 1 Right-click an empty area of the screen, and choose Properties. 2 Click the Settings tab. 3 Click the Advanced button. 4 Click the nView tab, click the nView Display Mode in the list on the left, and then select the Standard [Dualview] option.
storing cds, dvds, or memory To store CDs and DVDs, open the bay cover (figure A) and gently lift the two sections to form the spindle (figure B). You can store up to ten discs. To store memory cards, open the top cover and, if necessary, lower the two spindle sections (figure A). A B docking a peripheral device To use the multi-storage bay for a peripheral device, do the following: 1 Open the bay cover (A).
3 Connect the data cable to the USB or FireWire (IEEE 1394) connector on the back of the PC. Plug the power cord for the peripheral device into a power outlet. C D placing a peripheral device on the multi-storage bay (top) To use the chassis top to place a peripheral device, do the following: 1 Open the bay cover (A). Hold the cover on each side near the hinges, then lift the cover and slide it toward the back of the chassis (C). Gently lift it off.
4 Connect the cables to the device and place it on top of the chassis (G). Connect the data cable to the USB or FireWire (IEEE 1394) connector on the back of the PC. Plug the power cord for the peripheral device into a power outlet. G E T F using the optional camera station pc top Your PC chassis may include the optional camera station feature. This feature lets you install a special bay cover on the PC chassis for using the DockSpot camera station (sold separately).
1 Open the bay cover (A on page 64). Hold the cover on each side near the hinges, then lift the cover and slide it toward the back of the chassis (C on page 65). Gently lift it off. To make it easy to insert the cables during step 3, grasp the tab (T) and pull it out toward the front of the chassis (E on page 66). Replace the tab when done threading the cables. 2 Place the camera cradle (H) (included with the camera) onto the DockSpot (J). 3 Place the DockSpot into the bay.
5 Put the new cover on the cover hinges (P). Close the cover over the DockSpot. P hp dvd wri ans exp ter ion & cd- wri ter y / ba xxx 0000 hp ion pavil 6 Connect the DockSpot cables: • Plug the USB cable (K) into the back of the PC. • Plug the red and yellow connectors (L) into a TV if you want to view the camera images on a TV. • Plug the power cord (M) into a power outlet.
taking care of your pc protecting your pc from power surges Power surges, for example voltage spikes, power outages, or brownouts may cause software problems. Symptoms of voltage spikes include a flickering video display, unexpected PC startups, and the PC not responding to your commands. A voltage spike can occasionally corrupt or destroy files. Because of this, you should: • Consistently make backup copies of your data files.
The virus-scanning program manufacturer provides free virus scan updates through your Internet connection for an initial period after your PC purchase. You can purchase a subscription service for updates after the initial free period expires. You should take the following precautions to protect your PC: • • • • Do not open unsolicited e-mail from unknown sources. Download files only from sources you feel are safe. Always scan documents for viruses before opening them.
viewing the amount of used and free disk space 1 Click Start on the taskbar. 2 Click Control Panel. 3 Click Performance and Maintenance, if it is present. 4 Double-click Administrative Tools. 5 Double-click Computer Management. The Computer Management window opens. 6 Double-click Storage. 7 Double-click Disk Management (Local). Information displays for each drive on your PC. You may need to scroll the window to the right to see the capacity and free space sizes.
removing desktop icons You can remove most desktop icons by either deleting them or moving them to an unused icons folder. CAUTION: Do not delete unfamiliar desktop icons. Instead, follow the steps to move unfamiliar desktop icons to the Unused Desktop Shortcuts folder. Delete a desktop icon by right-clicking the icon and then selecting Delete. To move a desktop icon to the Unused Desktop Shortcuts folder: 1 Click Start. 2 Click Control Panel. 3 Click Appearance and Themes, if it is present.
troubleshooting For help on general and miscellaneous problems you may be experiencing with your PC, refer to the following pages for possible solutions. For more detailed information, press the Help button on your keyboard, or click Start on the taskbar and select Help and Support. Symptom describes the sign or warning message for the type of problem. To find help for problems with your PC, see the table in this section that describes the symptom, problem, and solution for your situation.
audio Symptom Problem Solution No sound is produced. Volume is muted. Press the Mute button on the keyboard to see if the mute feature is turned on. Or 1 Click Start, and then click Control Panel. 2 Click Sounds, Speech, and Audio Devices, if it is present, and then double-click Sounds and Audio Devices. 3 Click the Mute check box to remove the check mark from the box. Volume is turned down. Use the keyboard controls to increase the volume. Speakers are turned off.
cd-rom, cd-rw, dvd-rom, or dvd writer drive Symptom Problem Solution CD-ROM, CD-RW, DVDROM, or DVD+RW/+R drive cannot read a disc or takes too long to start. Disc is upside down in the drive tray. Reinsert the disc with the label facing up. DVD drive takes longer to start because it has to determine media type being played. Wait at least 30 seconds to let the DVD drive determine the type of media. If it still does not start, read the other solutions listed in this topic. Disc is dirty.
cd-rom, cd-rw, dvd-rom, or dvd writer drive (continued) Symptom Problem Solution Cannot create (burn) a CD. Problem with disc. • Make sure the disc is clean and undamaged. If recording stopped during a recording session, the disc may be damaged; use a different disc. • Use the correct type of disc for the type of files you are recording. When using a CD-R disc, make sure it is blank when recording music, and is blank or appendable (disc with space to add more data files) when recording data.
diskette (floppy) drive (select models only) (continued) Symptom Problem Solution Diskette drive cannot save (write) information to the diskette. Diskette is full or the file is too big. Use another diskette or compress the file to reduce its size. Diskette is write-protected. Slide the write-protection tab to the unlocked position on the diskette. File Save command was not properly executed. When saving information to the diskette drive, verify that you are using the correct drive letter.
hard disk drive Symptom Problem Solution PC seems to be locked up and not responding. Program in use has stopped responding to commands. Use the Windows Task Manager to close any programs not responding or to Restart the PC: 1 Press the Ctrl, Alt, and Del keys on the keyboard at the same time. 2 Select the program that is not responding, and click End Task. Or Click Shut Down, and then click Restart. If this does not work, press the On button for 4 or more seconds to turn off the PC.
hardware installation (continued) Symptom Problem Solution New device does not work. Cannot install new device driver. You must be logged in as the computer administrator to install or uninstall a device driver. To switch users, click Start, click Log Off, and then click Switch User; choose the computer administrator user. (The computer administrator is usually the user Owner.) New or existing device does not work after installing a new device. A hardware device conflict exists.
internet access Symptom Problem Solution Cannot connect to the Internet. Internet Service Provider (ISP) account is not set up properly. Verify Internet settings, or contact your ISP for assistance. Modem is not set up properly. Reconnect the modem, verifying connections; see page 8. Note that your PC may also have an Ethernet network interface (also called a network interface card, or NIC) that connects to a LAN (Local Area Network).
keyboard and mouse Symptom Problem Solution Keyboard commands and typing are not recognized by the PC. Keyboard connector is not properly connected. Turn off the PC by using the mouse, reconnect the keyboard to the back of your PC, and turn on your PC. Program in use has stopped responding to commands. Restart or turn off your PC using the mouse. Keyboard is damaged.
keyboard and mouse (continued) Symptom Problem Solution Optical mouse does not track cursor well. The optical sensor uses the pattern of the surface to track the position of the cursor. Reflective surfaces, grooved surfaces, glass, or other see-through surfaces inhibit the ability of the sensor to track the cursor. Place the mouse on a mousepad or white sheet of paper. Mouse sensor is dirty. Wipe the light sensor lens on the bottom of the mouse with a lint-free cloth (not paper).
power Symptom Problem Solution PC will not turn on and/or start. PC is not securely connected to an external power source. Ensure that cables connecting the PC to the external power source are plugged in properly. Monitor is not connected or is not on. Connect the monitor to the PC, plug it in, and turn it on. Line voltage selection switch is not in the proper position for your country/region (115V/230V).
miscellaneous Symptom Problem Solution PC date and time display is incorrect. RTC (real-time clock) battery may need to be replaced. Battery life is approximately 3–5 years. First, reset the date and time in your operating system by using the Control Panel. If the problem persists, replace the battery. See the “upgrading and servicing the pc” for instructions, or refer to the Warranty & Support Guide to contact Support for replacement details. Printer has problems.
using application recovery and system recovery The PC uses the operating system and installed software programs during normal operation. If your PC works improperly or stops because of the software, you may be able to repair it. You need recovery discs (CDs or DVDs) for some repairs that use the HP Application Recovery program or the HP PC System Recovery program.
• System Restore This Microsoft Windows XP feature creates a restore point where it records the PC settings at that time and date. You can later return the PC to the settings recorded at the restore point. You can create a specific restore point, or have the operating system create a restore point. For example, when you use Add Programs to add a software program, the operating system automatically creates a restore point before it adds the software.
Problem/Status Microsoft System Restore You installed a new application or device driver 1 An application does not work 1 A device driver does not work PC stops responding or does not work You replaced the hard disk drive or removed the partition 1 Application Recovery program System Recovery from the hard disk partition 2 3 1 2 2 System Recovery from the recovery CDs/DVDs 3 1 using application recovery and system recovery 87
creating recovery cds/dvds 1 You can recover (bring back) the operating system and programs that were included on your hard drive just as they were when you bought the computer. A hard drive is a disk inside the computer that stores the operating system, programs, and data. 2 You recover the operating system and programs directly from your hard drive, where a copy was placed for your convenience. We call this part of your hard drive the “recovery partition.
using recovery cd-dvd creator Make recovery CDs or DVDs for your PC by using the HP PC Recovery CD-DVD Creator program before you experience any problem. The recovery discs set is a complete image of the original PC hard disk drive contents and is matched to your PC model number. The discs set contains the operating system, drivers, and application software that were originally installed on the PC at the factory. You can use this program to make only one set of recovery CDs or DVDs for your PC.
using the recovery tools cd Your PC allows you to create (burn) a Recovery Tools CD. After you make the HP PC Recovery Tools CD, you can use it to: • Read instructions to use each utility on the Recovery Tools CD. • Start the System Recovery program from the recovery partition. • Remove the System Recovery partition from your PC hard disk drive to increase space for data. • Create a new data partition on your PC hard disk drive.
to start system restore: 1 Close all open programs. 2 Click the Start button. 3 Choose All Programs. 4 Choose Accessories. 5 Choose System Tools. 6 Click System Restore. Follow the onscreen instructions. application recovery NOTE: Not all models include the Application Recovery program. Perform steps 3 through 5 of the following procedure. If HP Application Recovery appears in the folder, your PC includes the program.
system recovery When other methods of repairing your system software (like System Restore or Application Recovery) fail, you may want to use the HP PC System Recovery program as a last resort to reinstall the software. When necessary, you can reinstall the operating system and the application software that was originally installed on the PC at the factory by using the System Recovery program. WARNING: The HP PC System Recovery program will delete any data or programs that you installed after purchase.
starting system recovery if the pc is not responding 1 Turn off the PC. If necessary, press and hold the On button until the PC turns off. 2 Disconnect all peripheral devices from the PC except the monitor, the keyboard, and the mouse. 3 Press the On button to turn the PC on. 4 During the startup, do the following to enter the System Recovery program: When the blue screen with the HP Invent logo appears, press the F10 key on the keyboard.
to run system recovery program using recovery discs: 1 If the PC works, back up all data files that you want to save onto removable media, such as CD-RW or diskette. Remove the backup CD or diskette you’ve made. 2 Press the Eject button on the top disc drive, and wait for the tray to open. Insert Recovery disc #1 and close the tray. 3 Turn off the PC: • If the PC works: Click Start on the taskbar, click Turn Off Computer, and then click Turn Off.
upgrading and servicing the pc This chapter provides instructions on how to remove and replace the hardware components of your PC. • Use “upgrading and servicing the pc (1)” on page 97 if your PC looks like A. • Use “upgrading and servicing the pc (2)” on page 119 if your PC looks like B. • If your PC does not resemble any of these pictures, then your PC may have a separate printed guide.
96 user’s guide
upgrading and servicing the pc (1) The “upgrading and servicing the pc” guide provides instructions on how to remove and replace hardware components of your PC.
opening and closing the pc preparing the pc Read the following items before attempting to upgrade or service the PC: • These procedures assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment. • Write down and save the system model and serial numbers, all installed options, and other information about the system.
removing the side panel 1 See “before opening the pc” on page 98. 2 Loosen the two thumbscrews on the right side of the back panel. The first time you loosen these screws, you may need to use a Phillips screwdriver. These screws do not detach; they stay on the side panel loosely until you tighten them again. 3 Pull the panel back toward you until it stops. Lift the panel off the chassis and set it aside. NOTE: You do not need to remove the other side panel to replace the hardware listed in this guide.
locating components inside the pc A Upper optical drive bay B Lower optical drive bay C Diskette (floppy) drive (select models), or 7-In-1 memory card reader (select models) or empty D 7-In-1 memory card reader (select models) or empty E Memory sockets F Primary hard disk drive G Expansion bay for second hard disk drive H Lithium battery I PCI/AGP Add-in card slots A B C D E F G H I removing the front panel This procedure is only necessary when removing or replacing an optical drive, a 7-In-1 memory card
B A 3 Locate the three small tabs (B) attached to the front panel on the side of the chassis. Press each tab away from the center of the chassis. Press the top, the middle, and the bottom tab, and then gently remove the front panel. replacing the front panel 1 Place the chassis upright, and then align the bottom of the front panel with the ridge on the bottom of the chassis.
2 Guide the three small tabs (B) on both sides of the front panel into the correct holes, until the panel snaps into place. B A 3 Lock the front panel release tab (A) by pushing it until it rests against the hard drive bracket. The arrow mark on the release tab points to lock when it is in the lock position. removing and replacing drives Your PC includes several drives that you can replace or upgrade.
• One diskette drive (select models), or one 7-In-1 memory card reader (select models), or no drive (a blank) located directly under the lower optical drive bay. • One 7-In-1 memory card reader (select models), or no drive (a blank) located under the diskette drive. • One primary hard disk drive and an expansion bay for a second hard disk drive. removing an optical drive 1 Remove the side panel that has thumbscrews. See page 99. 2 Remove the front panel. See page 100. 3 Gently lay the PC on its side.
4 Make sure the jumper on the new drive is in the CS (Cable Select) position. CS SL MA NOTE: A jumper is a small plastic connector or wire that electrically connects two pins in order to define a configuration setting. Below is an example of drive with Cable Select jumper installed (your drive may vary). 5 Slide the new optical drive through the front of the PC. Don’t slide the drive in all the way; you need room to attach the cables.
removing the 7-in-1 memory card reader or the diskette (floppy) drive The PC has a removable drive cage that holds the 7-In-1 memory card reader and the diskette drive. You can remove and replace either of these drives if they are included with your model. To ensure that the drive fits properly into the PC, be sure to purchase the replacement diskette drive from HP. Refer to the Warranty & Support Guide for contact information.
7 Remove the screw from each side of the drive cage to remove the 7-In-1 memory card reader. Or Remove the screw from each side of the drive cage to remove the diskette drive. 8 Pull the drive out through the front of the drive cage. installing the 7-in-1 memory card reader or the diskette (floppy) drive 1 See “removing the 7-in-1 memory card reader or the diskette (floppy) drive” on page 105. 2 Slide the replacement drive into the drive cage until the two screw holes on each side are aligned.
4 Pull the drive cage release tab (E) back. Align the four holes on the top of the drive cage with the four hooks (G) on the bottom of the optical drive bracket. Slide the drive cage so that the hooks go into the holes on the drive cage, and then push the drive cage forward until it snaps into place. G E 5 Connect the cables to the back of the drive you installed. 6 Replace the side panel. See page 99.
4 Push the release tab attached to the hard drive bracket (H) until it is unlocked. Gently push the hard drive in the same direction and then pull it out of the hard drive bracket (J). H J 5 Remove the cables from the back of the hard drive.
replacing the preinstalled hard drive 1 Make sure the release tab on the hard drive bracket is in the unlocked position before you insert the new hard drive. 2 Attach the IDE and power supply cables to the back of the hard drive. WARNING: Make sure the IDE cable end labeled Master is connected to the primary hard drive. If you have a second hard drive, make sure the IDE cable labeled Slave is connected to the second hard drive.
4 Push the release tab on the top of the hard drive bracket into the locked position (L). 5 Replace the side panel. See page 99. installing a second hard drive Some PC models may have an empty bay to add a second hard drive. You must provide the drive and four 6/32 x ¼” screws (length of ¼-inch is 0.64 cm) to secure the drive to the chassis. 1 Remove the side panel. See page 99. 2 Remove the front panel. See page 100. 3 Gently lay the PC on its side.
7 Make sure the jumper on the new drive is in the CS (Cable Select) position. Below is a drive with a Cable Select jumper installed. Your drive may vary. CS SL MA 8 Attach the power cable to the back of the drive. 9 Make sure you attach the connector marked Master on the IDE ribbon cable to the back of the primary hard drive. After this primary connection is attached, twist the remaining part of the cable marked Slave on that same IDE ribbon cable and connect it to the second hard drive.
10 Place the second hard drive inside the chassis and align it to the screw holes (P) on the front of the chassis. Use four regular 6/32 x ¼” (equivalent length is 0.64 cm) screws (not included with your PC) to secure the hard drive to the front of the PC. Insert the screws from the front of the PC chassis into the drive. Tighten the screws. 11 Connect the end of the IDE cable labeled CPU to the motherboard.
13 Attach the two screws to the hard drive bracket (R). 14 Replace the preinstalled hard drive. See page 109. 15 Replace the front panel. See page 101. 16 Replace the side panel. See page 99. removing a second hard drive 1 Remove the side panel. See page 99. 2 Remove the front panel. See page 100. 3 Gently lay the PC on its side. 4 See “removing the preinstalled hard drive” on page 107. NOTE: You do not need to remove the preinstalled hard drive from the bracket when installing a second hard drive.
adding memory The motherboard contains sockets for DDR DIMMs (double data rate dual inline memory modules). To determine the memory capacity and speed of the memory module your PC model uses, and for specific memory module information and specifications go to the Web site listed in your Warranty & Support Guide and click the Support link. The motherboard contains 184-pin DDR DIMM sockets. The number of sockets depends on which model you have.
removing a memory module 1 Remove the side panel that has thumbscrews. See page 99. 2 Gently lay the PC on its side. 3 Locate the memory sockets on the motherboard. 4 Move any cabling out of the way, if necessary. 5 Push down the two retaining clips on the ends of the socket until the memory module pops out of the socket. Hold the memory module by its edges only, as you lift it away from the socket. Store it in its antistatic packaging. WARNING: Do not pull the memory module out of the socket.
installing a memory module 1 See “removing a memory module” on page 115. 2 Holding the new memory module by its edges only, remove it from the antistatic packaging. (Avoid touching the memory chips or the gold contacts on the module.) The memory module has one or two small notches on the lower edge, which fit into raised bumps in the memory socket. 3 Hold the memory module in alignment with the socket, aligning the notches with the bumps.
removing an add-in card 1 Remove the side panel that has thumbscrews. See page 99. 2 Gently lay the PC on its side. 3 To prepare an empty card slot for a new card, loosen the screw of the expansion slot cover. Remove the cover of the empty slot. 4 If you are replacing a card, make a note of any external or internal cables attached to the card, and then disconnect them. 5 Loosen the screw on the bracket of the card you are replacing. 6 Hold the bracket and the far top corner of the card.
replacing the battery A lithium battery on the motherboard provides backup power for the PC’s timekeeping capability. The battery has an estimated life expectancy of seven years. When the battery starts to weaken, the date and time may be incorrect. If the battery fails, replace it with a CR2032 lithium battery (3 volt, 220mAH rating) or an equivalent battery. WARNING: There is danger of explosion if the battery is incorrectly replaced. Replace only with the same, or equivalent, type of battery.
upgrading and servicing the pc (2) chassis features of the pc Before you begin, identify your computer chassis using the illustrations below. On the top of some computers is a CD holder (A). You can store CDs inside this compartment, so you can quickly locate them. This feature is not available on all models. To connect components to the front of the PC, flip open the port cover (B) and plug the cables into the corresponding connectors.
opening the computer WARNING: The PC is heavy; be sure to use ergonomically correct lifting procedures when moving the computer. WARNING: Electrostatic discharge (ESD) can damage disk drives, add-in cards, and other components. If an ESD station is not available, wear a wrist strap attached to a metal part of the computer. Place cards on a conductive foam pad or inside the conductive wrapper they came in; do not place the cards on top of the wrapper.
removing the side panel You must remove the side panel to add memory, insert add-in cards, install or remove drives, or change the battery: 1 Turn off the computer and all peripherals. 2 Disconnect the modem/telephone cable. 3 Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor). 4 Loosen the two thumbscrews on the right side of the back panel. The first time you loosen these screws you’ll need a flathead screwdriver.
6 Grasp the handle (A) with your other hand and pull the panel toward you until it stops. A 7 Lift the panel up and out. Set the panel aside. removing the fan duct NOTE: If your computer does not have a fan, skip this procedure. To access some components on the motherboard, you may need to remove the fan duct. NOTE: Make sure the computer is turned off and the modem/telephone cable and power cord are disconnected from the computer. 1 Remove the side panel (see “removing the side panel” on page 121).
3 To disengage the fan duct (B), push down the two tabs (C). You can push with your fingers or a pen. C B 4 Rotate the fan duct down and out to remove it from the chassis. removing the drive cage The PC has two drive cages. The top cage that holds the CD or DVD drive(s) is stationary. The bottom cage that holds the diskette drive and hard drive is removable. You may need to remove this bottom drive cage to access internal components or to add or replace a hard drive.
5 Push down on the drive cage release tab (D). D 6 Hold the release tab down as you rotate the cage up and lift it out.
adding memory The motherboard contains sockets for either DIMMs (dual in-line memory modules), or DDR DIMMs (double data rate dual in-line memory modules), depending on which PC model you have. To determine which type of memory module your PC uses, and for specific memory module information and specification, go to the Web site listed in your Warranty and Support Guide and click the Support link. The motherboard contains 168-pin DIMM sockets or 184-pin DDR DIMM sockets.
ddr dimms DDR DIMMs must be 184-pin unbuffered DDR SDRAM (double data rate synchronous dynamic random access memory). The PC ships with one or more memory modules, but you can replace the existing memory module(s) with higher-capacity ones. You can install 64 MB, 128 MB, 256 MB, or 512 MB memory modules in the computer. installing a memory module 1 Turn off the computer and all peripherals. 2 Disconnect the modem/telephone cable.
9 Hold the memory module in alignment with the socket, aligning the notches with the bumps. DIMM DDR DIMM 10 Push straight down on top of the memory module until it is fully seated in the socket. The retaining clips on the ends of the socket automatically lock it into position when the memory module is fully seated. To reassemble the computer: 1 If you moved any cabling, restore the cable connections and routing. 2 Replace the fan duct and the side panel (see “closing the computer” on page 140).
7 Push down the two retaining clips on the ends of the socket until the memory module pops out of the socket. DIMM and DDR DIMM WARNING: Do not pull the memory module out of the socket. Use the retaining clips to eject the module. 8 Holding the memory module by its edges only, lift it away from the socket. Store it in its antistatic packaging. To install a new memory module in this socket, see “installing a memory module” on page 126.
6 To prepare an empty card slot for a new card, loosen the screw of the expansion slot cover of the empty slot (E). Remove the expansion slot cover of the empty slot. E WARNING: Be careful of the sharp edges on the expansion slot cover. 7 If you are replacing a card, disconnect any external and/or internal cables attached to the card. 8 Loosen the screw on the bracket of the card you are replacing (F). 9 Hold the metal bracket and the far top corner of the card.
11 Attach the screw to secure the card you have replaced (F). F To reassemble the computer: 1 Replace the side panel (see “replacing the side panel” on page 144). 2 Reconnect the power cord and all other cables. 3 Reconnect the modem/telephone cable. 4 Turn on the computer and all peripherals. 5 Install any software drivers supplied by the card manufacturer.
adding and removing drives You can install a second hard drive into the system or replace the existing hard drive. In addition, you can replace the existing diskette or optical drives. installing a second hard drive The PC has an empty 3.5-inch drive bay to accommodate an additional hard drive. 1 Turn off the computer and all peripherals. 2 Disconnect the modem/telephone cable. 3 Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor).
removing the preinstalled hard drive You need to remove the hard drive from the chassis if you want to replace it with a higher-capacity drive or if you want to safeguard your data when sending the computer out to be repaired. To remove the preinstalled hard drive: 1 Turn off the computer and all peripherals. 2 Disconnect the modem/telephone cable. 3 Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor).
6 Remove the screw (A) on each side of the diskette drive. A NOTE: The second screw (A) is on the other side of the drive cage (not pictured). 7 Pull the diskette drive out. To install a new diskette drive: 1 Slide the diskette drive into the drive cage, until the two screw holes align. 2 Attach the screws on each side of the drive cage. To reassemble the computer: 1 Replace the drive cage (see “replacing the drive cage” on page 141). 2 Reattach the cables to the back of the hard and diskette drives.
replacing the optical drive Your computer comes with one or two optical drives (CD-ROM, DVD, and/or CD-Writer or DVD+RW) in the top two bays that you can replace or upgrade. To remove the existing optical drive: 1 Turn off the computer and all peripherals. 2 Disconnect the modem/telephone cable. 3 Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor). 4 Remove the front cover: Locate the small release hole (A) on the top of the computer.
7 If you are adding a drive to an empty lower bay, remove the bay insert by putting your fingers in the holes (B) and pulling the insert toward you and out of the computer. Skip to the next section, “To install a new optical drive.” B 8 Locate the screws (C and D) on the optical drive. C D NOTE: The location of the screws varies, depending on the computer chassis you have. Make sure to identify your chassis on page 134, and refer to the appropriate optical drive drawings.
9 If you are removing the optical drive in the lower optical drive bay, remove the two screws (D) on the drive and push the drive partway out through the front of the computer. Or If you are removing the upper optical drive, remove the screws (C and D) on both optical drives and push both drives partway out through the front of the computer. (This allows better access to the cables at the back of the drive.
To install a new optical drive: NOTE: Make sure the jumper on the new drive is in the CS (Cable Select) position. 1 Slide the new optical drive through the front of the computer. Don’t slide the drive in all the way — you need room to attach the cables. 2 Connect the cables to the back of the drive(s). 3 Push the drive(s) all the way in, align the screw holes and insert the screws as follows: • Upper drive bay, full-sized drive — use C screw holes. • Lower drive bay, full-sized drive — use D screw holes.
3 Lift the door of the CD holder located on the top of the chassis, if your computer has one (Chassis II and Chassis III only). NOTE: If your computer has a top door and you don’t lift the door of the CD holder before you attach the front cover, the front cover will not fit properly and could break, if forced. 4 Locate the notches (J) near the bottom of the front cover. The location of the notches will vary slightly, depending on your model. J 5 Locate the knobs (K) on the front face of the chassis.
6 Hook the notches onto the knobs. 7 Press the front cover toward the chassis until it snaps into place. 8 Close the door of the CD holder located on the top of the chassis, if your computer has one (Chassis II and Chassis III only). 9 Reconnect the power cord and all other cables. 10 Reconnect the modem/telephone cable. 11 Turn on the computer and all peripherals. 12 Install any software drivers supplied by the drive manufacturer.
3 Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor). 4 Remove the side panel (see “removing the side panel” on page 121). 5 If necessary to reach the battery, remove the drive cage (see “removing the drive cage” on page 123). 6 If necessary to reach the battery, remove the fan duct (see “removing the drive cage” on page 123). 7 If any cards restrict access to the battery: • Remove the add-in card bracket. (See 7–9 of “installing add-in cards” on page 128.
replacing the drive cage 1 Holding the drive cage at a 45-degree angle, slide the two nubs (A) on the drive cage into the guides (B) on the chassis. A B NOTE: The second nub (A) is on the other side of the drive cage (not pictured). 2 Align the track (C) on the drive cage with the guide (D) on the stationary drive cage.
3 Push the removable drive cage firmly against the stationary cage as you rotate the removable drive down into position. 4 To make sure that the cage is locked into position, grasp the drive cage and pull up forcefully. NOTE: If you are able to remove the drive cage without pressing the release tab, you didn’t properly align the track with the guide. Repeat steps 1–4 above.
replacing the fan duct NOTE: If your computer does not have a fan, skip this procedure. 1 Holding the fan duct at a 45-degree angle, align the bottom of the duct with the hole on the fan holder. 2 Rotate the fan duct into position and make sure it’s securely locked.
replacing the side panel 1 Lay the side panel on top of the chassis, aligning the notches on the panel with the holes on the chassis. 2 Slide the side panel forward until it locks in place. 3 Tighten the thumbscrews on the side panel.
index 5.
creating a DVD, 60 creating CDs using CD-RW drive, 57, 59 creating CDs using Windows Media Player, 59 creating CDs with RecordNow!, 57 creating recovery discs, 89 creating Recovery Tools CD, 90 customizing keyboard buttons, 29 D desktop, 16 desktop icons, removing, 72 device conflict, resolving, 79 device not working, 84 digital images, managing, 46 digital picture work area, 46 digital pictures, 46, 48 disconnecting TV, 63 Disk Cleanup utility, 72 diskette copying files, 53 inserting, 53 diskette (floppy)
Easy Internet Sign-up, 33 finding an ISP, 32 keyboard button, 28 organizing destinations, 17 restricting content, 34 searching the, 34 signing up with an ISP, 32 Internet connection, high speed, 9 Internet Service Provider (ISP), defined, 31 InterVideo WinDVD Player, using, 55 K keyboard customizing buttons, 29 features, 21, 22 indicators, 26 troubleshooting, 81 types of buttons, 26 using, 21 wireless, 24 keyboard keys alphanumeric, 24 arrow, 25 edit, 25 function keys, 25 numeric, 26 L LEDs, defined, 23 l
no sound, 74 not working, 81 organizing information, 17 problem turning on, 83 running tests, 37 servicing and upgrading, 95 setting it up, 3 settings, 16 sleep mode.
speakers, 41 multi-channel, 41 special offers, 38 Standby button, 27 standby mode automatic, 13 manual, 12 Start button, 16 Start menu contents, 16 storage, multi-storage bay, 63 Support messages, 38 telephone numbers, 39 surface, using mouse on, 19 System Recovery, 92 starting, if PC is not responding, 93 starting, if PC is responding, 92 using recovery discs, 88 warning, 92 when to use, 86 System Restore, 86, 90 system updates, 38 T television, viewing PC image on a TV, 60 terminology for DVD, 55 tips, 3
150 user’s guide
