Advanced Setup Guide

32 Advanced Setup Guide (features vary by model)

3 Connect the front stereo mini-jack end of a Y adapter cable into the lime green Audio

Line Out connector that matches the back of your computer.

Connect the left and right ends of the Y adapter cable into the front left (L) and right (R)

inputs on the back of the receiver/amplifier.

4 If you have rear speakers, connect the rear stereo mini-jack end of a Y adapter cable

into the Audio Line In (blue) or the Rear Speaker Out (black) connector that matches

the back of your computer.

 Connect the left and right ends of the Y adapter cable into the rear left (L) and

right (R) inputs on the back of the receiver/amplifier.

5 If you have a center/subwoofer speaker, connect the stereo mini-jack of a Y adapter

cable into the microphone (pink) connector or the center speaker/subwoofer (gold)

connector that matches the back of your computer.

 Connect the left and right ends of the Y adapter cable into the center/subwoofer

inputs on the back of the receiver/amplifier (6/5.1 or higher-channel system).

 Plug the Y adapter cable into the subwoofer connector on the back of the receiver

even if a subwoofer is not used.

6 Turn on the receiver/amplifier.

7 Select the receiver/amplifier input that the Y adapter cables are plugged into.

8 Turn on the computer.

NOTE:

 Type 3 is three connectors.

 Type 6 is six connectors.

 Type S is sound card.

NOTE: Receiver/amplifier input connectors may be labeled Surround, 5.1 Channel

inputs, 6 Channel inputs, CD, DVD, or DVD In.

36S