Getting Started Guide

Connecting Speakers or Microphone 29

Connecting a home stereo system to a computer requires audio cables that are long

enough to reach from the computer to the stereo. You also must purchase Y adapter or

mini-extension cables.

2.1 home stereo installation

The following diagram shows a typical two-channel (2.1 speaker) installation that uses

passive stereo speakers and plugs into a home stereo standard left and right input.

This is only a suggested configuration. Your system may be different.

Computer to 2.1 multichannel audio system connection

A Computer back-panel connectors (type 3, type 6, or sound card)

B Y adapter cables

C Receiver/amplifier (audio input jacks)

D Subwoofer

E Front speakers (left and right)

NOTE: Y adapter and mini-extension cables are purchased separately.

ECDE