Upgrading and Servicing Guide

Installing a CD/DVD drive
NOTE: The replacement part may look different
than the original part because of manufacturer or
model differences; however, the replacement part
meets or exceeds the specifications of the original
part.
1. Locate where the CD/DVD drive is to be
inserted.
2. Insert the new CD/DVD drive into the slot and
slide it back partially into the computer.
3. Slide the CD/DVD drive back all the way into
the slot.
4. To lock the CD/DVD drive into place, move
"Lever A" to the number "2" position. Slide the
CD/DVD drive out slightly until "Lever A" latches
into position to secure the drive.
If you have more than one CD/DVD drive to
install, repeat this step. However, instead of
moving “Lever A”, move “Lever B.”
12 Upgrading and Servicing Guide Features may vary by model.