Upgrading and Servicing Guide

6. Tighten the screw, securing the side panel to the
back of the computer.
7. Plug the power cord and any additional cables
into the back of the computer.
8. Press the power button to turn on the computer.
Troubleshooting
If the computer displays a memory error after you
have turned it back on:
1. Turn the computer off and unplug the power
cord.
2. Open up the memory compartment and make
sure the memory card is firmly seated.
3. To install the memory card correctly, make sure
it is inserted all the way into the compartment
and then push down on it to snap it into place.
Printed in:
18 Upgrading and Servicing Guide Features may vary by model.