Upgrading and Servicing Guide

5. Slide the side panel toward the back of the

computer.

6. Pull the side panel away from the computer.

7. Lay the computer on a flat surface.

8. Locate the power supply in the computer.

NOTE: Before removing the power supply

carefully note its orientation in the computer. The

replacement power supply will need to be

placed in the same position.

9. Press the latch on the power supply connector to

disconnect it from the motherboard. This

connector is located between the processor and

the chassis fan.

NOTE: The cables inside the unit might be

held together by a tie-wrap. If so, carefully cut

the tie-wrap so the power supply can be

removed at the end of the procedure.

Features may vary by model.

Removing and Replacing a Power Supply