Upgrading and Servicing Guide

5. Reattach the power supply connector, that is
close to the hard disk drive, into the
motherboard. Make sure the cable does not
interfere with the processor fan.
6. Reattach the power cable to the CD/DVD drive.
Make sure the cable does not interfere with the
processor fan.
7. Reattach the power cable to the hard disk drive.
Make sure the cable does not interfere with the
processor fan.
8. Place the computer in an upright position.
9. Install the side panel on the side of the
computer, and then slide it toward the front of
the computer.
NOTE: Make sure the panel is flush with the
computer. Failure to do so might cause the panel
to bend slightly outward and not close securely.
28 Upgrading and Servicing Guide Features may vary by model.