Upgrading and Servicing Guide

11. Lay the computer on a flat surface.
12. Remove the two screws that secure the hard disk
drive cage to the computer.
13. Using a screwdriver, push the lever marked “1”
on the base on the right side of the hard disk
drive cage by the motherboard.
14. Grasp the hard drive cage and slide the cage
toward the CD/DVD drive, and then lift the cage
out of the computer.
15. Disconnect the two cables from the end of the
hard disk drive. The cables may have a latch
that is pressed to release the cable.
4 Upgrading and Servicing Guide Features may vary by model.