8.14.01 HP Utility Meter User's Guide (June 2009)

The switch should have a green circle to the left of the IP address, which indicates that it is connected
to the Utility Meter. If the switch is listed, then you have verified that the switch is configured in the Utility
Meter.
If the switch is not listed, see Add Device.
3. In the Utility Meter GUI's Managed Devices Tree (left pane), click the switch's expansion button to
display the URS and non-URS disk arrays that are managed by the device.
Figure 4-6 Utility Meter GUI Managed Devices
If the physical disk arrays that are managed by the device do not appear, see Add Device.
If the Utility Meter GUI's Managed Devices Tree (left pane) contains all of the switches and SMI Agents,
then you have verified that they are configured and metered by the Utility Meter.
4.9.2 Verifying a Device is Connected to the Utility Meter
To verify that a device is connected to the Utility Meter, see Device Connection.
If there is a problem with the connection from a device to the Utility Meter, you need to troubleshoot the
Utility Meter. For storage-device troubleshooting information, see Troubleshooting a Storage Device.
4.9.3 Verifying the Connection from the Utility Meter to HP
To verify the connection from the Utility Meter to HP for a URS installation, see Verifying Connectivity from
the Utility Meter to HP.
If there is a problem with the connection from the Utility Meter to HP, you need to troubleshoot the Utility
Meter. For Utility Meter troubleshooting information, see Chapter 5: “Troubleshooting the Utility Meter”.
4.9 Verifying a SAN Device 87