8.14.01 HP Utility Meter User's Guide (June 2009)

B.2 Networking Details on the Windows Server Running Command View
EVA
URS needs Command View EVA to inventory EVA arrays. Please fill out the table below for details in it. If
multiple Command View EVA instances will be in use, please duplicate this page and complete one table
per instance.
AnswerQuestion
IP address or hostname of the Windows server running Command
View EVA that is controlling one or more EVA disk arrays under
a URS contract
Username/password
1
of the Command View EVA GUI on the
above server
1 For security reasons, this information can be made available at the time of installation only.
NOTE: The SMI-S and the Performance Monitoring services in CV EVA are not needed for URS and should
not be installed.
B.3 Networking Details on the Server Running Brocade’s SMI-S Agent
URS interfaces to the Brocade SMI-S Agent to inventory Brocade SAN switches. Please fill out the table below
for details on it. If multiple SMI-S Agent instances will be in use, please duplicate this page and complete
one table per instance.
AnswerQuestion
IP address or hostname of the server running the Brocade SMI-S
Agent software that is controlling one or more Brocade SAN
switches under a URS contract
SMI-S Agent Authentication
Username/password
1
to access the Brocade SMI-S Agent on the
above server
Yes / NoDoes the SMI-S Agent require a certificate
1
?
1 For security reasons, this information can be made available at the time of installation only.
B.4 Networking Details on the Cisco SAN Switch
URS interfaces to the CIM server on a Cisco SAN switch. Please fill out the table below for details on it. If
multiple Cisco switches need to be configured for URS that have different CIM server details, please duplicate
this page and complete one table per switch.
AnswerQuestion
IP address or hostname of the Cisco SAN switch under a URS
contract
CIM Server Authentication
Username/password
1
to access the CIM server on the Cisco SAN
switch
Yes / NoDoes the CIM server require a certificate
1
?
1 For security reasons, this information can be made available at the time of installation only.
B.2 Networking Details on the Windows Server Running Command View EVA 99