Manualshelf

HP-UX PCI Error Handling and Error Recovery Support Matrix, April 2012

ManualsBrandsHP ManualsNetwork HardwareHP PCI Error Handling and Recovery
12
2
The minimum system firmware version supported on iocxgbe and fcoc drivers. For more information about the bundle name and PCI EH/ER supported OS, see Table 1.
The HP-UX drivers for the products shown in this matrix are distributed on HP-UX server and workstation Release Media and are installed with an Operating Environment. However, some of the
products and the drivers listed may be newer than your system’s Operating Environment. For more information about the I/O cards supported by the drivers, see the support matrix posted at
http://www.hp.com/go/hpux-iocards-docs.
Please send your feedback on this document to netinfo_feedback@cup.hp.com.
Legal Notices
© 2004-2012 Hewlett-Packard Company, L.P. The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein. HP-UX® , and Superdome® are registered trademarks of the Hewlett-Packard Corporation.
All other trademarks and registered trademarks are the property of the respective corporations.
Table 2 lists the platform support and minimum system Firmware version for all the drivers.
Platform Support
Minimum System
Firmware Version
HP Superdome 2 (PCIe)
3.64
4.40
2
8.6d
3.88
8.6.3
3.88
8.6.3
3.88
3.01
3.23
rx3660 (PCI/PCI-X ER)
3.01
rx3600 (PCI/PCI-X ER)
3.01
rx3600 (PCI/PCI-X)
3.01
rx2660 (PCI/PCI-X ER)
3.01
rx2620 (PCI/PCI-X EH)
3.01
43.5
23.1
23.1
17.005
23.1
17.005