PCI Error Handling Product Note, 2nd Edition, April 2006

PCI Error Handling Product Note
Accessing and Installing the PCI Error Handling Feature
Chapter
11
Installing PCI Error Handling from the Software Pack CD-ROM
To install PCI Errror Handling from the Software Pack CD-ROM:
Step 1.
Log in as root.
Step 2. Mount the CD drive to the desired directory. You can find the CD drive device file by using the
ioscan -fnC disk command. The following example uses the /cdrom directory:
# mount -r /dev/dsk/clt2d0 /cdrom
Step 3. Use Software Distributor (SD) to install the PCIErrorHandling bundle from the CD. The
autoreboot flag must be specified, because PCIErrorHandling pulls in a set of kernel patches. The
system will reboot after installation:
# swinstall -x autoreboot=true -s /cdrom/PCIErrorHandling PCIErrorHandling
When you install the PCIErrorHandling bundle, the following items will be included:
•
enhancement kernel patches to support PCI Error Handling
• btlan driver patch to support PCI Error Handling
NOTE In addition to installing the PCIErrorHandling bundle, the btlan, igelan, and iether drivers
require patches to enable PCI Error Handling and the latest version of the fcd driver must be
installed to enable PCI Error Handling.
The patch required for the btlan driver is included with the PCIErrorHandling bundle.
The patches required for the igelan and iether drivers must be downloaded and installed
separately from the IT Resource Center at http://www.itrc.hp.com.
—The iether driver requires patch PHNE 32199 or later.
—The igelan driver requires patch PHNE 34037 or later.
The latest version of the fcd driver (FibrChanl-01 bundle, version B.11.23.04.01, or later) must
be downloaded and installed from the Software Depot at http://h20293.www2.hp.com.