PCI Error Recovery Product Note, 3rd Edition, March 2008

PCI Error Recovery Product Note
PCI Error Recovery Documentation
Chapter
18
PCI Error Recovery Documentation
The documentation that supports this release of the PCI Error Recovery feature consists of:
• PCI Error Recovery Product Note — available at http://docs.hp.com/en/ha.html in the PCI Error Recovery
section.
• PCI Error Recovery Support Matrix — available at http://docs.hp.com/en/ha.html in the PCI Error
Recovery section.
• Interface Card OL* Support Guide — available at http://docs.hp.com/en/ha.html under the system
administration category.
• Patch Management User Guide for HP-UX 11.x Systems — available at http://docs.hp.com
• olrad(1M) — after installing the PCI Error Recovery feature, enter man olrad from the command line to
view the olrad manpage that includes PCI Error Recovery information.
• pci_eh_enable(5) — used to disable PCI Error Recovery, if it is installed on your system.
• pci_error_tolerance_time(5)— used to adjust error threshold for manual recovery option.
Terms and Definitions
HPMC High Priority Machine Check – Highest Priority interruption on PA-RISC based systems
MCA Machine Check Abort – Highest Priority interruption on Itanium
based systems
Post Replace Operation - By issuing the olrad -R slot_id command after an I/O card is replaced, slot
power is turned on, suspended drivers are resumed, driver scripts (post_replace) for the slot (slot_id) and
affected slots (if any) are run, and the attention LED for the slot (slot_id) is set to OFF.