PCI Error Recovery Product Note, June 2007

PCI Error Recovery Product Note

Conﬁrm PCI Error Recovery is Supported

Chapter

Conﬁrm PCI Error Recovery is Supported

Step 1. To conﬁrm PCI Error Recovery is supported with your conﬁguration and system ﬁrmware version,

see PCI Error Recovery Support Matrix, HP-UX 11i v3 at: http://docs.hp.com/en/ha.html

Step 2. To conﬁrm the system ﬁrmware version installed on your system, or any cell in your system, use

the sysrev command from the management processor Command Menu (CM) prompt:

MP:CM> sysrev

The sysrev command output on Superdome systems is different from the sysrev command output

on the other systems that support PCI Error Recovery.

The sysrev command output on Superdome systems will list the system ﬁrmware version under

the SYS FW heading as illustrated in the following example:

MP:CM> sysrev

Utility Subsystem FW Revision Level: 15.22

| Cabinet #0 | Cabinet #1 | Cab #8 | Cab #9 |

-----------------------+-----------------+-----------------+--------+--------+

Cell (slot 0) | 3.64 | 15.12 | 3.82 | 15.12 | | |

Cell (slot 1) | 3.82 | 15.12 | 3.66 | 15.12 | | |

Cell (slot 2) | 3.88 | 15.14 | 3.66 | 15.12 | | |

Cell (slot 3) | 3.82 | 15.12 | 3.50 | 15.10 | | |

Cell (slot 4) | 3.82 | 15.12 | 3.86 | 15.14 | | |

Cell (slot 5) | 3.64 | 15.12 | 3.82 | 15.12 | | |

Cell (slot 6) | 3.82 | 15.12 | 3.84 | 15.10 | | |

Cell (slot 7) | 3.88 | 15.14 | 3.82 | 15.12 | | |

| | | | |

MP | 15.22 | | | |

ED | 3.13 | | | |

CLU | 15.2 | 15.2 | 15.2 | 15.2 |

PM | 15.0 | 15.0 | 15.0 | 15.0 |

CIO (bay 0, chassis 1) | 15.0 | 15.0 | 15.0 | 15.0 |

CIO (bay 0, chassis 3) | 15.0 | 15.0 | 15.0 | 15.0 |

CIO (bay 1, chassis 1) | 15.0 | 15.0 | 15.0 | 15.0 |