PCI / PCIe Error Recovery Product Note, September 2010
Terms and Definitions
HPMC High Priority Machine Check Highest Priority interruption on PA-RISC based systems
MCA Machine Check Abort Highest Priority interruption on Itanium based systems
Post Replace Operation
By issuing the olrad -R slot_id command after an
I/O card is replaced, slot power is turned on, suspended
drivers are resumed, driver scripts (post_replace) for the
slot (slot_id) and affected slots (if any) are run, and the
attention LED for the slot (slot_id) is set to OFF
16 PCI / PCIe Error Recovery Product Note