IEther-00 (iether) B.11.31.0909 Gigabit Ethernet Driver Release Notes

Problems Fixed in Recent Versions

Table 2 HP-UX 11i v3 October 2008 Fixes — IEther-00 B.11.31.0810

DescriptionSR Number

On fiber cards with IEther-00 version B.11.23.0809 installed, performing any of the following

actions might cause a LINK DOWN condition that persists until the system reboots:

• Executing two or more resets with lanadmin -r.

• Performing multiple disable/enable cycles on the switch ports.

• Disconnecting and reconnecting the cabling.

QXCR1000854397

Table 3 HP-UX 11i v3 September 2008 Fixes — IEther-00 B.11.31.0809

DescriptionReference Number

NC364m card port link flaps when the interconnect bay is empty.QXCR1000771417

4 Known Problems and Limitations

No known problems were identified for this version of IEther-00 at the time of this publication.

5 Compatibility and Installation Requirements

This section describes the compatibility information and installation requirements for this release.

• For specific installation instructions, see the installation procedure or overview document

for your card.

• For detailed information on supported server platforms, operating systems, and firmware

level requirements, see the Ethernet System-Driver Matrix for HP-UX 11i v1, 11i v2, and 11i

v3.

These documents are available at:

http://docs.hp.com/en/netcom.html

5.1 Operating System and Version Compatibility

This release is specific for HP-UX 11i v3 (B.11.31).

5.2 Hardware Requirements

This version of IEther-00 runs on HP Integrity and HP 9000 servers with the HP-UX 11i v3

(B.11.31) operating system.

6 Related Information

The latest documentation for ethernet cards is available in English at:

http://docs.hp.com/en/netcom.html

7 Software Availability in Native Languages

The IEther-00 product is available only in the English language.